Migrate from CCKM Appliance

This section describes steps to export migration data from a CCKM Appliance to CCKM on a CipherTrust Manager (referred to as CCKM Embedded).

Before proceeding with migration:

• Note that the origin of migrated keys might not match between the CCKM Embedded and CCKM Appliance due to different terminologies used by these solutions.

• Pause all the schedules in the CCKM Appliance until the migration is complete, otherwise, the CCKM Appliance and CipherTrust Manager might have data mismatch after migration. After the migration is successful, you should enable all the schedules on the CipherTrust Manager.

• Perform synchronization of all the clouds in the CCKM Appliance, if required. However, you can also perform synchronization on the CipherTrust Manager after the migration is complete and the connection name is updated in containers.

• Ensure that Azure backup blobs exist on the Data Security Manager (DSM) for all Azure keys.

Minimum Supported Versions

• CCKM Appliance 1.10

• Data Security Manager 6.4.3

• CipherTrust Manager 2.9.0

Supported Clouds

The migration only supports AWS Cloud, Azure Cloud, Salesforce, and Salesforce Sandbox data.

Keys cannot be migrated from the DSM to the CipherTrust Manager. Migration of keys will be supported in a future release.

Prerequisites

• CCKM Appliance is configured with a supported DSM version

• IP address, admin credentials, and SSL certificate of the CCKM Appliance

• CipherTrust Manager is up and running

Steps

The high-level steps involved are:

1. Generate RSA Key Pair

2. Download Export File

3. Upload Export File

4. Apply Migration Data

5. Check Migration Status

6. Add DSM Cluster Nodes

7. Add Connection

8. Update Containers

The steps above apply to root domain only. To perform migration on a child domain, refer to Migration from CCKM Appliance to Child Domain.

Generate RSA Key Pair

Exporting migration data from CCKM Appliance requires an RSA key pair (public and private) on the CipherTrust Manager. The public key is used to encrypt the data while the private key is used to decrypt the exported data.

To generate an RSA key pair, run the ksctl keys create command:

./ksctl-linux-amd64 keys create --name <rsa-key-name> --alg <key-algorithm> --size <key-size>

Here,

• --name: Name for RSA key pair.

• --alg: Algorithm for the RSA key pair.

• --size: Size for the key pair.

Example:

./ksctl-linux-amd64 keys create --name rsa-key --alg RSA --size 4096

Output:

{
    "id": "b4336425a98541b68a105326be8abd777ac994f789ac46c2a79dd202bd4c33c1",
    "uri": "kylo:kylo:vault:keys:rsa-key-v0",
    "account": "kylo:kylo:admin:accounts:kylo",
    "application": "ncryptify:gemalto:admin:apps:kylo",
    "devAccount": "ncryptify:gemalto:admin:accounts:gemalto",
    "createdAt": "2021-05-07T03:55:47.519466Z",
    "name": "rsa-key",
    "updatedAt": "2021-05-07T03:55:47.519466Z",
    "usage": "sign",
    "usageMask": 3,
    "meta": {
        "ownerId": "local|5e3b45c6-6f26-4413-9752-e6fd15418a61"
    },
    "version": 0,
    "algorithm": "RSA",
    "size": 4096,
    "unexportable": false,
    "undeletable": false,
    "neverExported": true,
    "neverExportable": false,
    "emptyMaterial": false,
    "publickey": "-----BEGIN PUBLIC KEY-----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\nZDMxs7Rqj4cdezaa3CTV4l8CAwEAAQ==\n-----END PUBLIC KEY-----\n",
    "defaultIV": "78f83dddc0ee01a2ab3ff579c908a33a",
    "sha1Fingerprint": "878bcd84e81c4170",
    "sha256Fingerprint": "c9c2d321b21d34a3e82460df8839e55f3ebca977766658d830d5100fb29bed75",
    "objectType": "Private Key",
    "activationDate": "2021-05-07T03:55:43.229267Z",
    "state": "Active",
    "aliases": [
        {
            "alias": "rsa-key",
            "type": "string",
            "index": 0
        }
    ],
    "links": [
        {
            "id": "6dc578f7-1864-43a7-899a-5035d54f1772",
            "uri": "kylo:kylo:vault:links:6dc578f7-1864-43a7-899a-5035d54f1772",
            "account": "kylo:kylo:admin:accounts:kylo",
            "application": "ncryptify:gemalto:admin:apps:kylo",
            "devAccount": "ncryptify:gemalto:admin:accounts:gemalto",
            "createdAt": "2021-05-07T03:55:47.531762Z",
            "updatedAt": "2021-05-07T03:55:47.531762Z",
            "type": "publicKey",
            "source": "kylo:kylo:vault:keys:rsa-key-v0",
            "sourceID": "b4336425a98541b68a105326be8abd777ac994f789ac46c2a79dd202bd4c33c1",
            "target": "kylo:kylo:vault:keys:rsa-key-pub-v0",
            "targetID": "bd3e3bfa246f470ea6327646b3db359fcb882a6e2a6d4f839c2138569d99e395",
            "index": 0
        }
    ],
    "uuid": "4b9e7c53-40d7-44b7-9fa1-31cf8d0237d3",
    "muid": "4b9e7c53-40d7-44b7-9fa1-31cf8d0237d3e129ed33-317d-4584-9cbf-d0e882f58fca"
}

In the sample output above, "sourceID": "b4336425a98541b68a105326be8abd777ac994f789ac46c2a79dd202bd4c33c1" is the private key ID. The "targetID": "bd3e3bfa246f470ea6327646b3db359fcb882a6e2a6d4f839c2138569d99e395" under "links" is the public key ID, which is used to download the export file.

Download Export File

As a CipherTrust Manager administrator, download the migration data (the export file) from the CCKM Appliance. This file contains migration data to be uploaded to CCKM Embedded.

Run the command:

./ksctl-linux-amd64 migrations download --cckm-host  "<cckm-ip-or-hostname>" --cckm-user "<cckm-user>" --cckm-certificate "<certificate-file-content>" --public-key-id "<public-key-id>"

Here,

• --cckm-host: IP address or hostname of the CCKM Appliance.

• --cckm-user: Admin user of the CCKM Appliance.

• --cckm-certificate: SSL certificate downloaded from the CCKM Appliance.

  By default, the content of the SSL certificate spans over multiple new lines. However, to input the certificate as an inline argument, the certificate content needs to be converted into the single-line format where every new line is represented by \n.

  To covert the certificate into the single-line format:

  1. Download the certificate in a file (say certificate.cert).

  2. Store the certificate file at a location on your machine, for example, at /root/cert/.

  3. Run the following command:

     
     awk 'NF {sub(/\r/, ""); printf "%s\\n",$0;}' <full-path-to-certificate-file>
     

     For example, to convert your certificate file (/root/cert/certificate.cert), run the command:

     
     awk 'NF {sub(/\r/, ""); printf "%s\\n",$0;}' /root/cert/certificate.cert
     

     The above command returns the certificate in the single-line format, as shown below:

     
     -----BEGIN CERTIFICATE-----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\n02+F2es0v8/XeGvzkuy55dTO7SwhLGTKiuv5L2ADawGQmlNQ7thNUN2P\n-----END CERTIFICATE-----\n
     

  4. Copy the returned single-line certificate content. You need to paste this content as the value for --cckm-certificate.

• --public-key-id: ID of the local (public) key of the RSA key pair generated in Generate RSA Key Pair.

The command prompts for the password. Enter the password of the CCKM Appliance user (cckm-user).

Example:

./ksctl-linux-amd64 migrations download --cckm-host "127.0.0.1" --cckm-user "admin" --cckm-certificate  "-----BEGIN CERTIFICATE-----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\n02+F2es0v8/XeGvzkuy55dTO7SwhLGTKiuv5L2ADawGQmlNQ7thNUN2P\n-----END CERTIFICATE-----\n" --public-key-id  "bd3e3bfa246f470ea6327646b3db359fcb882a6e2a6d4f839c2138569d99e395"

Output:

CCKM enterprise user password:
File is downloading.
File downloaded successfully: migration_20210621143427.json

An export file named "migration_<TIMESTAMP>.json" (for example, migration_20210621143427.json) is created and downloaded to your machine.

Upload Export File

As a CipherTrust Manager administrator, upload the downloaded export file to CCKM Embedded.

Run the command:

./ksctl-linux-amd64 migrations upload --file <export-file-name>

Here,

• --file: Name of the export file.

Example:

./ksctl-linux-amd64 migrations upload --file migration_20210621143427.json

Output:

{
    "id": "26304f13-5626-419b-bd81-459fda7fdb68",
    "file_size": 21712358,
    "created_at": "2021-05-07T04:55:33.251439962Z",
    "checksum_sha256":"3e853d19e1d4a3687dfcf7bde5fc6bb192c19345462c5f4ae05c481acf26968b",
    "product": "CCKM"
}

Note down the "id" value, "26304f13-5626-419b-bd81-459fda7fdb68". It is required when applying the migration data. Now, you need to apply the migration data to CCKM Embedded (refer to Migrate Complete Data).

Apply Migration Data

The migration data can be applied to CCKM Embedded in two ways:

• Migrate Data of Set of Containers

• Migrate Complete Data

Migrate Data of Set of Containers

This method requires a list of containers. After the exported file is uploaded to the CipherTrust Manager, you can get the list of containers and select the containers to be migrated.

To migrate the data of a set of containers:

1. List the migrated containers.

   Run the command:

   
   ./ksctl-linux-amd64 migrations containers list –id <export-file-id>
   

   Here,

   • --id: ID of the uploaded export file. Refer to Upload Export File for the ID of the export file.

   Example:

   
   ./ksctl-linux-amd64 migrations containers list --id 26304f13-5626-419b-bd81-459fda7fdb68
   

   Output:

   {
       "Containers": [
           {
               "id": "b10ba3f2-b835-485d-b09a-07d4c002ff97",
               "type": "aws",
               "name": "805182230944",
               "tenant": "805182230944"
           },
           {
               "id": "0de664f3-7c70-4fae-9213-4e16bb99a4fc",
               "type": "aws",
               "name": "556782317223",
               "tenant": "556782317223"
           },
           {
               "id": "3f2b09ba-485d-b835-b09a-07d4c002ff97",
               "type": "salesforce",
               "name": "0056A0000011XDvQAM",
               "tenant": "0056A0000011XDvQAM"
           },
           {
               "id": "4f4b11ba-c385-456d-b09a-07d4c002ff97",
               "type": "salesforcesandbox",
               "name": "0056A0000011ABvZCM",
               "tenant": "0056A0000011ABvZCM"
           },
           {
               "id": "0941754d-9cb9-4b32-a241-59f7a4703756",
               "type": "azure",
               "name": "pkv-premium",
               "tenant": "d27d849e-e487-4b0e-a54c-a71e67687d10"
           }
   }
   

   This command returns the list of containers with their IDs. From this list, you can select the containers to be migrated.

2. Select the desired containers to be migrated. In this example, we will migrate the containers with the IDs "b10ba3f2-b835-485d-b09a-07d4c002ff97" and "0941754d-9cb9-4b32-a241-59f7a4703756".

3. Apply the migration to migrate the desired container.

   Run the command:

   
   ./ksctl-linux-amd64 migrations apply --id <export-file-id> --private-key-id <private-key-id> --containers "<container1-id>,<container2-id>,...,<containerN-id>"
   

   Here,

   • --id: ID of the uploaded export file. Refer to Upload Export File for the ID of the export file.

   • --private-key-id: ID of the private key of the RSA key pair. Refer to Generate RSA Key Pair for the private key ID.

   • --containers: Comma-separated Azure/AWS container IDs.

   Example:

   
   ./ksctl-linux-amd64 migrations apply --id 26304f13-5626-419b-bd81-459fda7fdb68 --private-key-id b4336425a98541b68a105326be8abd777ac994f789ac46c2a79dd202bd4c33c1 --containers "b10ba3f2-b835-485d-b09a-07d4c002ff97,0941754d-9cb9-4b32-a241-59f7a4703756",
   

   Output:

   {
       "id": "26304f13-5626-419b-bd81-459fda7fdb68",
       "file_size": 22940401,
       "created_at": "2021-05-06T14:19:54.76812635Z",
       "status": "In progress",
       "checksum_sha256": "3386289c00e7e8bf7ad70a5ca12d0852913c0fb3a54f584c28460aa9cd65383e",
       "product": "CCKM"
   }
   

   The container migration data is applied. It might take some time to complete. Verify the migration status. Refer to Check Migration Status for details.

Migrate Complete Data

To migrate the complete data, run the command:

./ksctl-linux-amd64 migrations apply --id <export-file-id> --private-key-id <private-key-id>

Here,

• --id: ID of the uploaded export file. Refer to Upload Export File for the ID of the export file.

• --private-key-id: ID of the private key of the RSA key pair. Refer to Generate RSA Key Pair for the private key ID.

Example:

./ksctl-linux-amd64 migrations apply --id 26304f13-5626-419b-bd81-459fda7fdb68 --private-key-id b4336425a98541b68a105326be8abd777ac994f789ac46c2a79dd202bd4c33c1

Output:

{
    "id": "26304f13-5626-419b-bd81-459fda7fdb68",
    "file_size": 22940401,
    "created_at": "2021-05-06T14:19:54.76812635Z",
    "status": "In progress",
    "checksum_sha256": "3386289c00e7e8bf7ad70a5ca12d0852913c0fb3a54f584c28460aa9cd65383e",
    "product": "CCKM"
}

Check Migration Status

After you have applied the migration data, verify the migration status by running the ksctl migrations status command.

Example:

./ksctl-linux-amd64 migrations status

Output:

{
    "id": "9c9149ad-901b-405f-aefd-b279e6257f97",
    "overall_status": "Completed",
    "source": "CCKM",
    "cckm_azure_keys": {
    "status": "Completed",
    "num_processed": 100,
    "num_failed": 0,
    "num_ignored": 0 },
    "cckm_sfdc_keys": {
    "status": "Completed",
    "num_processed": 100,
    "num_failed": 0,
    "num_ignored": 0 },
    "cckm_aws_keys": {
    "status": "Completed",
    "num_processed": 100,
    "num_failed": 0,
    "num_ignored": 0 },
    "cckm_dsm_keys": {
    "status": "Completed",
    "num_processed": 100,
    "num_failed": 0,
    "num_ignored": 0 }
}

In the sample output above, "overall_status": "Completed" indicates that migration of CCKM Appliance to CCKM Embedded is successful. Also, verify that migration status of different clouds and key sources such as "cckm_azure_keys", "cckm_aws_keys", and "cckm_dsm_keys" is "Completed".

In the output, "num_ignored" indicates the number of Azure keys for which blobs are present on the DSM but the keys have been deleted.

After the migration status is "Completed", you can add connection to supported clouds and key sources to perform operations on the added data.

Add DSM Cluster Nodes

If your DSM was in a cluster before migration, then after migration, the DSM connection information will contain only the IP address or hostname with which your CCKM Appliance was configured.

To add other DSM cluster nodes, update the migrated DSM connection on the CipherTrust Manager. Refer to Adding Node in an Existing DSM Connection for details.

Add Connection

Add connection to the desired clouds on the CipherTrust Manager. Refer to Connection Manager for details on connection management.

Update Containers

After the connection is created, update connection in AWS KMS, Azure key vaults, and Salesforce organizations on the Containers tab. After the update, keys in supported clouds and key sources can be managed from CCKM Embedded.

For Salesforce, you also need to synchronize certificates and update endpoints linked with the organizations.

• Synchronize certificates: After migration, the certificates linked with the cache-only keys and schedulers are not synchronized. You need to manually synchronize them on CCKM. Refer to Prepare the Cache-Only Key Integration for details.

• Update endpoints: The endpoint URLs used in Named Credentials for cache-only keys before migration will not work after migration. This is because the Callout URL check performed by Salesforce while fetching the cache-only keys will fail. So, you need to update the endpoint URLs in Named Credential on Salesforce and create the same endpoints on CCKM.

  Alternatively, you can create new endpoint URLs on Salesforce and CCKM and use them.

  Refer to Prepare the Cache-Only Key Integration and Edit a Salesforce Cache-Only Key Endpoint for details.

Migration from CCKM Appliance to Child Domain

To migrate CCKM Appliance data to CCKM Embedded in a child domain:

1. Set export KSCTL_DOMAIN=<child-domain> on the machine where you will run the ksctl commands.

2. Perform the following steps:

   1. Generate RSA Key Pair

   2. Download Export File

   3. Upload Export File

   4. Apply Migration Data

   5. Check Migration Status

   6. Add DSM Cluster Nodes

   7. Add Connection

   8. Update Containers

Known Issue

The manual add version/rotation process (using Clone Existing Key Material) of Google Cloud symmetric keys using migrated AWS DSM keys does not work.