Hardware Security Module

A Hardware Security Module (HSM) is a physical device that provides more secure management of sensitive data, such as keys, inside CipherTrust Manager.

CipherTrust Manager internally uses a chain of key encryption keys (KEKs) to securely store and protect sensitive data such as user keys. When an HSM is used, the CipherTrust Manager generates and uses a set of keys on the HSM partition that protect the KEKs chain and become the root of trust. If multiple CipherTrust Manager instances are configured to use the same HSM partition they end up using shared 'root of trust' keys.

After setting up an HSM to allow CipherTrust Manager to connect as a client, you can configure an HSM as the root-of-trust using the CipherTrust Manager GUI. This can also be done using the API or the CLI toolkit ksctl, as shown below. It is assumed that you have added a CipherTrust Manager user and URL to the ksctl configuration file.

You must set up the HSM to allow CipherTrust Manager to connect as a client, including creating necessary passwords, certificates, and string values. For more detailed information on creating these HSM objects, refer to HSM product documentation.

With the CipherTrust Manager API or CLI toolkit ksctl, it is possible to:

• Setup HSMs

• Get and List detailed information on existing HSMs

• Add HSMs

• Delete HSMs

Refer to the CipherTrust Manager API and CLI online documentation for more information.

Supported HSMs

The CipherTrust Manager supports the following HSMs:

• SafeNet Luna Network HSM (version 5, 6 and 7)

  Note

  CipherTrust Manager has been tested with the Luna Network HSM firmware versions 7.0.3 and 7.3.3. These firmware versions are validated with Federal Information Processing Standard (FIPS) level 140-2.

• Luna T-Series Network HSM

• SafeNet Luna PCIe HSM

• AWS CloudHSM (Cavium)

• Thales Data Protection On Demand (DPoD) Luna Cloud HSM Service

• Azure Dedicated HSM with a Virtual CipherTrust Manager which is also hosted on Microsoft Azure. This setup requires a specific deployment architecture.

Hybrid HSM

Since release 1.3.0, any CipherTrust Manager can be clustered with another CipherTrust Manager, regardless of the HSM partition it is using, or even if it is not using an HSM partition at all. This is different from prior releases that required all CipherTrust Manager's in a cluster to be connected to the same HSM partition. When cluster nodes have different HSMs, it is called a "Hybrid HSM" configuration. When cluster nodes share the same HSM partition, it is called a "Shared HSM" configuration. There are several implications to a "Hybrid HSM" configuration that should be taken into consideration when deploying a cluster.

1. System Security: A system is only as secure as its weakest link. In a Hybrid HSM configuration, a CipherTrust Manager instance that is rooted in an HSM can be clustered with an instance that is not - this reduces the overall security of the system. The most secure configuration is to have all CipherTrust Manager instances use an HSM.

2. Cluster Join Security: When a system is joined to a cluster, it must receive certain keys that allow it to join the cluster. A shared HSM partition can protect these keys from ever being exposed. In this scenario, the join operation should use the ksctl utility's --shared-hsm-partition flag for the best security.

3. Backup Security: When a backup is created, there is a ksctl option called --tied-to-hsm that can tie the backup to the HSM of the instance. This is the most secure backup, but also limits it to being restored on a system with access to that specific HSM partition. By default, a backup is not tied to a specific HSM partition and can be restored to any compatible CipherTrust Manager system.

Setting up an HSM

Creating the first HSM requires that you supply the hsm type and connection information (connInfo).

The general ksctl hsm setup command is:

$ ksctl hsm setup <hsm type> <config parameters>

The valid options for hsm type are:

• "luna" for SafeNet Luna HSM,

• "lunapci" for the embedded SafeNet Luna PCIe HSM in CipherTrust Manager k570 models,

• "lunatct" for Luna T-Series Network HSM,

• "aws" for AWS CloudHSM,

• "dpod" for DPoD Luna Cloud HSM Service

The configuration info (config parameter) depends on the hsm type and is described below. You must set up the HSM to allow CipherTrust Manager to connect as a client, including creating necessary passwords, certificates, and string values. For more detailed information on creating these HSM objects, refer to HSM product documentation.

SafeNet Luna Network HSM and Luna T-Series HSM (hsm type: luna, lunatct)

CipherTrust Manager has been tested with the Luna Network HSM firmware versions 7.0.3 and 7.3.3. These firmware versions are validated with Federal Information Processing Standard (FIPS) level 140-2.

For the SafeNet Luna Network HSM or Luna T-Series HSM, the required parameters for initial configuration are:

• - hsm-host: IP or hostname of the HSM

• - partition-name: The name of the HSM partition to use

• - partition-password: The password of the initial partition to use. For Luna 7 and most Luna 6, this is the Crypto Officer role password or challenge secret. For Luna 5 and some Luna 6, this is the partition password or challenge secret. This password will also be used if more servers and high-availability (HA) mode is used, in which case all HSM must have the same password.

• - serial: Serial number of the partition to use

• - server-cert-file: File containing server certificate in PEM format

• - client-cert-file: File containing client certificate in PEM format

• - client-cert-key-file: File containing client private key in PEM format

• - delay: Delay in seconds before reset, defaults to 5 seconds

• - reset: Reset the CipherTrust Manager instance as part of operation

Following is a full example for a SafeNet Luna Network HSM setup command:

$ ksctl hsm setup luna --reset --partition-name “partition name” --partition-password “sOmeP@ssword” --hsm-host https://192.168.0.1 --serial 1234 --server-cert-file server_cert.pem --client-cert-file client_cert.pem --client-cert-key-file client_cert_key.pem

Embedded SafeNet Luna PCIe HSM (hsm type: lunapci)

For the embedded Luna PCIe HSM in CipherTrust Manager k570 models, the required parameters for initial configuration are:

• - partition-name: The name of the HSM partition to use

• - partition-password: The password of the initial partition to use

• - delay: Delay in seconds before reset, defaults to 5 seconds

• - reset: Reset CipherTrust Manager instance as part of operation

The SafeNet Luna PCIe HSM does not require any extra configuration information.

Following is a full example for a Luna PCIe HSM setup command:

$ ksctl hsm setup lunapci --reset --partition-name “partition name” --partition-password “sOmeP@ssword”

AWS CloudHSM (Cavium) (hsm type: aws)

Prerequisite - Prepare an instance of CloudHSM in AWS:

• Prior to configuring CipherTrust Manager instance to use AWS CloudHSM service, an instance of CloudHSM must be prepared in AWS. Refer to AWS CloudHSM documentation to create, initialize and activate a CloudHSM cluster. This step involves running a separate AWS client instance to connect and setup HSM users as well as sign the cluster CSR of your cloudhsm cluster instance. Upon completion of this step you will have a cloudhsm cluster in "Active" state. See: https://docs.aws.amazon.com/cloudhsm/latest/userguide/getting-started.html

• Create a new cryptouser on your new cloudhsm instance. Similar to the cluster activation step when you reset the CO password, use the cloudhsm_mgmt_util utility on the AWS client instance to create a new user with cryptouser role (CU). CipherTrust Manager will communicate to the HSM instance on behalf of this CU user you setup.

For AWS CloudHSM (Cavium), the required parameters for initial configuration are:

• - partition-name: (Optional) The name of the HSM partition to use for CloudHSM. Defaults to "cavium"

• - cryptouser-password: Specify the credentials of a cryptouser in the form of "username:password"

• - hsm-host: IP Address or host name of cloudhsm cluster

• - server-cert-file: This is the CA public certificate that was used to sign the CloudHSM Cluster CSR during the cluster initialization. Restated, it is the certificate that signed the Cluster certificate. Refer to: https://docs.aws.amazon.com/cloudhsm/latest/userguide/initialize-cluster.html

• - delay: Delay in seconds before reset, defaults to 5 seconds

• - reset: Reset CipherTrust Manager instance as part of operation

Following is a full example of an AWS CloudHSM setup command:

$ ksctl hsm setup aws-cloud-hsm --reset --cryptouser_password “sOmeP@ssword” --hsm-host https://192.168.0.1 --server-cert-file server_cert.pem

Thales Data Protection On Demand (DPoD) Luna Cloud HSM service (hsm type: dpod)

The CipherTrust Manager integration with Luna Cloud HSM service uses JWT-based authentication, which has been required for all clients to this service since December 31, 2021.

You must provide the AuthTokenConfigURI, AuthTokenClientId, and the AuthTokenClientSecret values from the service client package's Chrystoki.conf file. For older clients, you must provide the CVAppSpecificData value from Chrystoki.conf.

Prerequisites:

• You have installed a service client and provisioned the Luna Cloud HSM Service.

• The connection information (partition-name and co-password) is obtained while provisioning your Luna Cloud HSM service.

• The configuration information is obtained from the HSM client package. This includes certificate files and authentication values in the Chrystoki.conf file, and the cv-partition-data value from crystoki-template.ini.

For DPoD, the required parameters for initial configuration are:

• -- partition-name: The name of the partition configured during partition initialization

• -- co-password: The password of the Crypto Officer

• -- server-cert-file: Path to server-certificate.pem file

• -- partition-cert-file: Path to partition-certificate.pem file

• -- partition-ca-cert-file: Path to partition-ca-certificate.pem file

• -- cv-partition-data: PartitionData00 value from crystoki-template.ini

• -- auth_token_config_uri: AuthTokenConfigURI value from Chrystoki.conf

• -- auth-token-client-id: AuthTokenClientId value from Chrystoki.conf

• -- auth-token-client-secret: AuthTokenClientSecret value from Chrystoki.conf

• -- delay: Delay in seconds before reset, defaults to 5 seconds

• -- reset: Reset CipherTrust Manager instance as part of operation

The following is a full example for a DPoD Luna Cloud HSM setup command:

$ ksctl hsm setup dpod --reset --partition-name “partition name” --co-password “sOmeP@ssword” --server-cert-file "server-certificate.pem" --partition-cert-file "partition-certificate.pem" --partition-ca-cert-file "partition-ca-certificate.pem" --cv-partition-data "crystoki-template-PartitionData00" --auth-token-config-uri "https://111111.uaa.system.snakefly.dpsas.io/.well-known/openid-configuration" --auth-token-client-id "1111111-1111-1111-1111-111111111111" --auth-token-client-secret "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa"

Getting and Listing HSMs

Get and List return detail information about the instance(s) added previously, Get returns a single instance and List returns an array of data.

Following is a full example of a HSM Servers List command:

$ ksctl hsm servers list

{
  "total": 2,
  "resources": [
    {
      "id": "2f81163b-f53d-45c1-b151-9bc333ce3a04",
      "type": "luna",
      "config": {
        "host": "192.168.0.1",
        "serial": "1234",
        "server-cert": "-----BEGIN CERTIFICATE-----\n...\n-----END CERTIFICATE-----"
      }
    },
    {
      "id": "be942b82-b00e-4f73-9081-28186e1580e6",
      "type": "luna",
      "config": {
        "host": "192.168.0.2",
        "serial": "4321",
        "server-cert": "-----BEGIN CERTIFICATE-----\n...\n-----END CERTIFICATE-----"
      }
    }
  ]
}

Adding an HSM

Adding subsequent HSMs to a CipherTrust Manager inserts them into the HA group. The first hsm servers add command that you do automatically creates an HA group. Adding an HSM only requires that you supply the configuration information.

The configuration information (config) is a JSON blob; it has the following keys:

• host

• serial

• server-cert

• forceClear (optional)

  When set to "true", forcefully clears all existing data on the partition of the joining node before adding it to the HA group. Make sure the existing objects are not used elsewhere. They cannot be recovered after the deletion. Use with caution.

• forceCopy (optional)

  When set to "true", all existing objects on the joining partition are retained and propagated within the HA group. This option can be useful if the joining partition is shared among CipherTrust Manager instances that use the partition only as a member of a current HA group. This option can also be useful if the joining partition is shared among different applications other than CipherTrust Manager, and the goal is to retain the existing security objects.

  Do not use the forceCopy option if the joining partition was previously used as root of trust for other CipherTrust Manager instance(s) and that it was not part of the current HSM HA group. Using this option in such cases can break the existing CipherTrust Managers that use the HA group servers. Use with caution.

Following is a full command example for adding a SafeNet Luna Network HSM:

$ ksctl hsm servers add --config '{ "host": "192.168.0.2", "serial": "4321", "server-cert": "-----BEGIN CERTIFICATE-----\n...\n-----END CERTIFICATE-----" }'

If the joining HSM partition contains data, the operation will fail unless forceClear or forceCopy flags are specified. The following example command shows how to forcefully add a partition by first wiping all its data:

$ ksctl hsm servers add --config '{ "host": "192.168.0.2", "serial": "4321", "forceClear": "true", "server-cert": "-----BEGIN CERTIFICATE-----\n...\n-----END CERTIFICATE-----" }'

Deleting an HSM

Delete will remove the record for the "--id" provided, with optional parameters for reset and delay. Just as in the Setup function, deleting the last HSM requires a reset of the CipherTrust Manager. After the reset operation, newly encrypted data is longer rooted to an HSM.

Following is a full example for the delete command:

$ ksctl hsm servers delete --id ce6da730-c266-44f8-a0f6-97e49c7596eb --reset