Your suggested change has been received. Thank you.

close

Suggest A Change

https://thales.na.market.dpondemand.io/docs/dpod/services/kmo….

back

DDC Administration

Troubleshooting

search

Please Note:

Troubleshooting

Error Messages

This section lists the various error messages that the system can display, with explanations and solutions (if available).

Branch Locations

Error MessageExplanation
"Branch Location name already exists" (message on toast)You tried to create a branch location with a name that is already taken by another branch location.
SOLUTION: Choose another name.

Data Stores

Error MessageExplanation
"Data Store name already exists" (message on toast)You tried to create a data store with a name that is already taken by another data store.
SOLUTION: Choose another name.
"A valid agent could not be found" (Agent selection - on mouse-over on the data store)There is no active agent for this data store that the automatic agent selection process has been able to detect.
SOLUTION: This requires additional research, such as checking if the agent is installed on the data store, if it has the right type (local/proxy), if it is of the right OS “flavor” (Linux, Windows), or of the right type (e.g. database). Refer to the Data Discovery and Classification Deployment Guide for more information on troubleshooting this issue.
One of the Oracle Data Stores has been configured with a wrong schema.SOLUTION: Check the Oracle schema that you used and change it if necessary. For more information, see "Adding Database Stores".

Scans

Error MessageExplanation
"Scan name already exists" (message on toast)You tried to create a scan with a name that is already taken by another scan.
SOLUTION: Choose another name.
"All Data Stores are disabled"(message on toast)You attempted to run a scan that has all data stores disabled.
SOLUTION: Enable at least one data store for the scan. Refer to the Managing Scans for instructions.
"The following Data Stores are not accessible: xyz" (message on toast)You tried to scan a data store that is not accessible. The scan is marked as Failed, and includes a warning icon with the message "The data store xyz included in the scan is not accessible" on mouse-over.
SOLUTION: Verify the connectivity from the agent to the data store. Verify the data store configuration.
"One or more Data Stores are not accessible." (on mouse-over on the scan fail icon)The scan failed because the data store that is configured is inaccessible. The data store failed after the scan was launched.
SOLUTION: There may be a number of reasons for this. To troubleshoot a failed data store refer to Managing Data Stores.
"The following Data Stores have no agent available: xyz" (on mouse-over on the scan fail icon)You tried to scan a data store that had no agent available when the scan was executed. There is a problem with the agent. The data stores that failed are listed.
SOLUTION: This requires additional research, such as checking if the agent is installed on the data store, if it has the right type (local/proxy), if it is of the right OS “flavor” (Linux, Windows), or of the right type (e.g. database). Refer to the Data Discovery and Classification Deployment Guide for more information on troubleshooting this issue.
"Data Store has incorrect credentials" (on mouse-over on the scan fail icon)Data store credentials provided are incorrect so the scan cannot be executed. These data stores are listed.
SOLUTION: Update the server credentials for the data store.
"One or more Data Stores have incorrect credentials" (message on toast)The credentials for one or more data stores are no longer valid (credentials modified, user deleted, and so on) preventing the scan from completing.
SOLUTION: Reconfigure the data store and re-launch the scan.
"The scanner service is not available" (message on toast)You tried to run a scan with the scan engine unavailable.
SOLUTION: Check the status of the scan engine (the CipherTrust Manager server).
"The following Data Stores have missing agents: xyz" (message on toast)This happens when an agent was assigned to the listed data store(s) and then when a scan was launched, for some reason the assigned agent could not be found on the server.
SOLUTION: Try to re-assign the agent in the data stores screen. If this does not work, check the agent assigned to the xyz data store.
"The following Data Stores have agent errors: xyz" (message on toast)This happens when a management request for an agent fails (for example, at verification or when setting it as a proxy) during the scan execution.
SOLUTION: It is usually a transient issue. Wait a few minutes and run the scan again. If it still fails, check the agent status.
"Error processing scan" (message on toast)This happens when the scan fails in the processing stage, that is when the scan results are being processed by DDC.
SOLUTION: Run the scan again. If the error persists, contact Thales Customer Support.
"Error connecting to HDFS" (message on toast)This happens when the scan fails because there is no HDFS connectivity.
SOLUTION: Check the HDFS configuration in DDC (Hadoop Services). Refer to the Data Discovery and Classification Deployment Guide for information on configuring the DDC-HDFS connection.
"Error connecting to PQS" (on mouse-over on a failed scan status)A scan failed because there is no PQS connectivity.
SOLUTION: Check the HDFS configuration in DDC (Hadoop Services) or PQS/Hadoop configuration in your Hadoop deployment. Refer to the Data Discovery and Classification Deployment Guide for information on configuring the DDC-PQS connection.
The Knox logs directory has been filled.SOLUTION: Change the Knox log level or purge the logs directory. Refer to Changing Knox Log Level in the Thales Data Platform Deployment Guide for details.
"Error checking the data allowance" (message on toast)This happens when DDC is not licensed. DDC sends a request for data allowance to the license server and the server responds that there is no license.
SOLUTION: Obtain and install a valid DDC license. Refer to DDC Licensing for licensing information.
"One target path is missing" (on mouse-over on the scan fail icon)A scan failed because one or more target paths are missing.
SOLUTION: Open the scan for editing, by following the Edit link embedded in the error message, and check which target path is missing (it will be indicated by a yellow exclamation mark in the Targets section).
"One database target has incorrect schema" (on mouse-over on the scan fail icon)A scan failed because one or more database targets have an incorrect schema.
SOLUTION: Open the scan for editing, by following the Edit link embedded in the error message, and check which target has an incorrect schema (it will be indicated by a yellow exclamation mark in the Targets section).
"One database target has incorrect table" (on mouse-over on the scan fail icon)A scan failed because one or more database targets have an incorrect table.
SOLUTION: Open the scan for editing, by following the Edit link embedded in the error message, and check which target has an incorrect table (it will be indicated by a yellow exclamation mark in the Targets section).
"One target has incorrect file extension" (on mouse-over on the scan fail icon)A scan failed because one or more targets have an incorrect file extension.
SOLUTION: Open the scan for editing, by following the Edit link embedded in the error message, and check which target has an incorrect file extension (it will be indicated by a yellow exclamation mark in the Targets section).
"One target has nested paths" (on mouse-over on the scan fail icon)A scan failed because one or more targets have nested paths.
SOLUTION: Open the scan for editing, by following the Edit link embedded in the error message, and check which target has a nested path (it will be indicated by a yellow exclamation mark in the Targets section).
"The target for Data Store is a file" (on mouse-over on the scan fail icon)A file cannot be a target of a data store.
SOLUTION: Open the scan for editing, by following the Edit link embedded in the error message, and put a directory as the target path (the failing target path will be indicated by a yellow exclamation mark in the Targets section).
"The target for Data Store is not a valid directory" (on mouse-over on the scan fail icon)The specified directory used as the target path is invalid.
SOLUTION: Open the scan for editing, by following the Edit link embedded in the error message, and check the directory. The invalid directory will be indicated by a yellow exclamation mark in the Targets section.
"The target for Data Store cannot be accessed" (on mouse-over on the scan fail icon)The specified path used ad the target path in inaccessible.
SOLUTION: Open the scan for editing, by following the Edit link embedded in the error message, and check the path. The inaccessible path will be indicated by a yellow exclamation mark in the Targets section.
"Data Allowance is exhausted" (on mouse-over on the scan status)A scan was run that exceeded the Data Allowance. All scans running when the Data Allowance gets exhausted (or after that) will fail. From that moment on, you cannot launch new scans.
SOLUTION: Contact Thales Customer Support and upgrade your DDC license. Refer to DDC Licensing for licensing information.
"Too many sensitive Data Objects found" (on mouse-over on the scan fail icon)Scan results have a limit on the amount of information (Sensitive Data Object found, infotypes and matches found on each Sensitive Data Object, etc.) and the scan results exceeded this limit. MongoDB data stores are particularly prone to this error.
SOLUTION: Split the original scan into multiple smaller scans, re-launch the scans and generate a single report combining the results from all the scans. To reduce the resulting scan size consider scheduling a different scan per Data Store and/or per Classification Profile and/or subpaths (such as folders and tables) in the original scan path.

Reports

Error MessageExplanation
"Report name already exists" (message on toast)You tried to create a report with a name that is already used in another report.
SOLUTION: Choose another name.
"The version of the scan that was used to generate the report can no longer be found."(message on toast)The report execution information in TDP references some resource version that is no longer available inside the DDC Database, such as Data Store, Custom Infotype, Classification Profile, or other, probably after restoring DDC from a backup that was taken before the referenced resource was created or modified.
SOLUTION: Please restore CipherTrust Manager from a newer backup that includes the referenced resource version, or update the report template to stop referencing the missing resource.
"The report template is configured with a scan execution that can no longer be found."(message on toast)The report template references a concrete scan execution that is no longer found in TDP, probably after restoring TDP from a backup that was taken before the referenced scan execution was completed.
SOLUTION: Please restore TDP from a newer backup that includes the information of the referenced scan execution, or edit the report template to reference a valid scan execution date.

Classification Profiles

Error MessageExplanation
"Classification Profile name already exists" (message on toast)You tried to create a classification profile with a name that is already taken by another classification profile.
SOLUTION: Choose another name.

Licensing

Error MessageExplanation
"DDC License not found - try again in a few minutes if you recently inserted one" (message on toast)Any action performed in the UI results in this message, because there is no valid DDC license installed.
SOLUTION: Obtain and install a valid license. Refer to DDC Licensing for licensing information.
"DDC License expired" (message on toast)Any action performed in the UI results in this message, because your DDC license has expired.
SOLUTION: Obtain and install a valid license. Refer to DDC Licensing for licensing information.

Hadoop Services

Error MessageExplanation
"Hadoop is not active. Please go to DDC Settings -- > Hadoop" (message on toast)Problem communicating with Hadoop or DDC has not been configured with Hadoop.
SOLUTION: Assuming that you have Hadoop deployed in your environment, configure DDC to use it (DDC Settings --> Hadoop in the CipherTrust UI). For a detailed procedure, refer to the Data Discovery and Classification Deployment Guide.
"Error connecting to the PQS database" (message on toast)Problem communicating with the Phoenix Query Server database (i.e. HBase).
SOLUTION: Check the PQS configuration in DDC (Hadoop Services) or PQS/Hadoop configuration in your Hadoop deployment. Refer to the Data Discovery and Classification Deployment Guide for information on configuring the DDC-PQS connection.
"Error creating the PQS database schema" (message on toast)Problem communicating with the Phoenix Query Server database.
SOLUTION: Check the PQS configuration in DDC (Hadoop Services) or PQS/Hadoop configuration in your Hadoop deployment. Refer to the Data Discovery and Classification Deployment Guide for information on configuring the DDC-PQS connection.
"Error using the PQS database schema" (message on toast)Problem communicating with the Phoenix Query Server database.
SOLUTION: Check the PQS configuration in DDC (Hadoop Services) or PQS/Hadoop configuration in your Hadoop deployment. Refer to the Data Discovery and Classification Deployment Guide for information on configuring the DDC-PQS connection.
"Error connecting to HDFS" (message on toast)SOLUTION: Check the HDFS configuration in DDC (Hadoop Services). Refer to the Data Discovery and Classification Deployment Guide for information on configuring the DDC-HDFS connection.
"Invalid HDFS directory path: Not a directory" (message on toast)SOLUTION: Check the HDFS configuration in DDC (Hadoop Services). Refer to the Data Discovery and Classification Deployment Guide for information on configuring the DDC-HDFS connection.
"Incorrect credentials in the HDFS connection" (message on toast)SOLUTION: Check the HDFS configuration in DDC (Hadoop Services). Refer to the Data Discovery and Classification Deployment Guide for information on configuring the DDC-HDFS connection.
Check that the authentication service is up and running.
"Incorrect HDFS URI" (message on toast)SOLUTION: Check the HDFS configuration in DDC (Hadoop Services). Refer to the Data Discovery and Classification Deployment Guide for information on configuring the DDC-HDFS connection.
"Invalid HDFS folder: the path to the folder does not exist" (message on toast)SOLUTION: Check the HDFS configuration in DDC (Hadoop Services). Refer to the Data Discovery and Classification Deployment Guide for information on configuring the DDC-HDFS connection.
"Invalid server certificate in the HDFS request" (message on toast)SOLUTION: Check the HDFS configuration in DDC (Hadoop Services). Refer to the Data Discovery and Classification Deployment Guide for information on configuring the DDC-HDFS connection.
"PQS incorrect credentials or authentication service not available" (message on toast)SOLUTION: Check the PQS configuration in DDC (Hadoop Services) or PQS/Hadoop configuration in your Hadoop deployment. Refer to the Data Discovery and Classification Deployment Guide for information on configuring the DDC-PQS connection.
Check that the authentication service is up and running.
"Invalid server certificate in the PQS request" (message on toast)SOLUTION: Check the PQS configuration in DDC (Hadoop Services) or PQS/Hadoop configuration in your Hadoop deployment. Refer to the Data Discovery and Classification Deployment Guide for information on configuring the DDC-PQS connection.
"Your system does not meet the 16GB RAM minimum" (message displayed across the bottom of all DDC screens)DDC requires at least 16GB of RAM to be able to run properly.
SOLUTION: Increase the RAM memory on board to at least the required minumum of 16GB.
Knox connection is not configured (message on toast)Displayed when the user tries to run a scan without setting Hadoop in DDC.
--Pending-- (message on toast)Displayed when a user tries to save HDFS settings but the hostname or port from the connection created in Connections Management are wrong or not reachable.
Livy connection refused (message on toast)Displayed when a user tries to save Livy settings but the hostname or port from the connection created in Connections Management are wrong or not reachable.
Invalid knox server certificate (message on toast)Displayed when a user tries to save HDFS or Livy settings but the certificate is invalid.
Invalid HDFS URI path (message on toast)Wrong parameter added in DDC Hadoop settings.
Invalid HDFS folder (message on toast)Wrong parameter added in DDC Hadoop settings
Invalid Livy URI path (message on toast)Wrong parameter added in DDC Hadoop settings.
503 Service Unavailable (message when configuring HDFS/Livy)If you are using CM proxy functionality, make sure it is properly configured. It should be possible to directly access TDP, to resolve its name, and to allow HTTPS connections to port 8443. Check your proxy software manual to get those rules configured.

Remediation

Error MessageExplanation
Remediation could not be done (on mouse-over on the scan fail icon)The scan with remediation failed. Please check all the remediation configuration before launching it again.

Info Log Messages

This section lists the various information messages that Data Discovery and Classification sends to CipherTrust Manager log.

OLEANDER INFO

Error MessageExplanation
"[Background-Processes] This node was NOT selected as active node. Turning off background processes"Related to clustering, self-explanatory error.
"[Background-Processes] This node was selected as active node. Turning on background processes"Related to clustering, self-explanatory error.
"[Background-Processes] Recovering collectors"Oleander has received a valid license and recovers the collector processes that were stopped.
"[Background-Processes] Updating license from DMV"Oleander is requesting from DMV the licenses available for DDC.
"[Background-Processes] Global license status set to nil"Oleander is unlicensed.
"[Background-Processes] Global license status set to ", "newLicenseStatus", *newLicenseStatusOleander license status is whatever newLicenseStatus is.
"[Background-Processes] Checking HDFS connectivityOleander is sending a ping to HDFS to check the connectivity.
"[Background-Processes] Cannot connect with HDFS", "error", errOleander's ping against HDFS has failed. Oleander has no connectivity with HDFS.
"[Background-Processes] HDFS connectivity successful"Oleander has successfully performed a ping against HDFS. Oleander has connectivity with HDFS.
"[Background-Processes] Checking PQS connectivity"Oleander is sending a ping to PQS to check the connectivity.
"[Background-Processes] Cannot connect with PQS", "error", errOleander's ping against PQS has failed. Oleander has no connectivity with PQS.
"[Background-Processes] PQS connectivity successful"Oleander has successfully performed a ping against PQS. Oleander has connectivity with PQS.
"[Background-Processes] License status has changed"Oleander license status has changed since the last license cron execution.
"[Background-Processes] Initializing fast cron: Oleander unlicensed","UnlicensedCronFrequency", o.Config.UnlicensedCronFrequencyOleander is unlicensed so the license cron (which asks DMV for a DDC license) increments its frequency. The frequency is defined in the docker-compose file.
"[Background-Processes] Initializing fast cron: waiting for Hadoop connectivity","HadoopConnectivityCronFrequency", o.Config.HadoopConnectivityCronFrequencyOleander has a valid license but does not have connectivity with Hadoop.
"[Background-Processes] Initializing slow cron: Oleander licensed and Hadoop connectivity successful", "RunningCronFrequency", o.Config.RunningCronFrequencyOleander has a valid license and has connectivity with Hadoop, the license cron decrements its frequency. The frequency is defined in the docker-compose file.
"[Background-Processes] About to run NO LICENSE scenario"Oleander has no valid license so it will stop all running scan watchers, automatic agent selections and scan schedules.
"[Background-Processes] About to run VALID LICENSE scenario"Oleander didn't have a valid license but now it has one so all scan watchers, automatic agent selections and scan schedules that were stopped are being resumed.
"[Background-Processes] Recovering automatic agent selection"Part of the VALID LICENSE scenario above.
"[Background-Processes] Starting automatic agent selection for pending datastores", "pending datastores", strings.Join(ds, ", ")Part of the VALID LICENSE scenario above.
"[Background-Processes] Recovering watchers"Part of the VALID LICENSE scenario above.
"[Background-Processes] Starting watchers for ongoing scans", "ongoing scans", strings.Join(ss, ", ")Part of the VALID LICENSE scenario above.
"[Background-Processes] Recovering scan schedules"Part of the VALID LICENSE scenario above.
"[Background-Processes] Migrating PQS database"Self-explanatory message.
"[Background-Processes] Deleting background process for scan", "name", sc.Scan.NameOleander has no valid license so all scans are being stopped as well as their corresponding background processes.
"[Background-Processes] Updating status to FAILED for scan", "name", sc.Scan.NameOleander has no valid license so all scans are being stopped (with status FAILED).
"Cannot connect to HDFS", "settings", hdfsSettings, "error", errOleander's ping against HDFS has failed. Oleander has no connectivity with HDFS.
"Cannot connect to PQS", "Settings", pqsSettings, "error", errOleander's ping against PQS has failed. Oleander has no connectivity with PQS.
"[Datastores] Agent selected: ", "Name", a.NameOleander has found and assigned a suitable agent for the mentioned datastore.
"Unable to connect with datastore", "datastore name", d.Name, "error", errA probe against the mentioned datastore has failed during a test connectivity check.
"Instantiating new scrim helper"Oleander is instantiating a new ScrimHelper object which is used for communication with Scrim, Minerva, Sallyport and DMV.
"Instantiating new hdfs scan collector"Oleander is instantiating a new HDFSCollector object which is used for communication and processing with HDFS.
"Instantiating scheduler cron"Oleander is instantiating a new SchedulerCron and starting the background processes.
"[WARNING] PQS connector can not be closed in GetSummaryReport service"Oleander was unable to close the PQS connector while executing a GetSummaryReport operation.
"[WARNING] PQS connector can not be closed in GetDatastoresDetailsReport service"Oleander was unable to close the PQS connector while executing a GetDatastoresDetailsReport operation.
"[WARNING] PQS connector can not be closed in GetReportTemplate service"Oleander was unable to close the PQS connector while executing a GetReportTemplate operation.
"[Scan-Actions] [WARNING] PQS connector can not be closed in GetScanExecutions service"Oleander was unable to close the PQS connector while executing a GetScanExecutions operation.
"[Scan-Watchers] Stop watcher signal received", "scan", sc.Scan.NameA running scan watcher has received a STOP signal and the current execution is cancelled.
"[Scan-Watchers] Watcher has failed stopping scan from scanned service"The scan has been in an INTERRUPTED status for too long so Oleander has tried to stop the scan in ER2 but the request was unsuccessful.
"[Scan-Watchers] Watcher has detected different status", "scan", sc.Scan.Name, "current status", sc.Scan.ScanProcess.Status, "scan service status", er2MappedStatusThe scan watcher has detected a change in the scan status, scan status will be updated in DDC.
"[Scan-Watchers] Interrupted status received", "MaxTimeInterruptedState", o.Config.Er2MaxInterruptedTime, "scan", sc.Scan.Name, "current status", sc.Scan.ScanProcess.Status, "scan service Mapped status", er2MappedStatus, "scan service status", er2Status, "InterruptedTimestamp", sc.InterruptedTimestampThe scan watcher has received an INTERRUPTED status for the scan, the scan watcher will continue asking until the status changes or the timeout is exceeded.
"[Scan-Watchers] Scan has finished... collector starting", "scan", sc.Scan.NameThe scan watcher has received a COMPLETED status for the scan, the scan status is set to PROCESSING in DDC and the scan collector starts.

SUNDEW INFO

Error MessageExplanation
"Asking for license status"Sundew is requesting from Oleander the DDC license status.
"Active license information received", "http ret code", cSundew has received a valid license status from Oleander.
"Starting scan service..."Sundew is launching ER2.
"Connectivity test successful, scan service is up"Sundew confirms that ER2 is up-and-running.
"Generating scan service license...", "ID", s.er2Status.lastIssuedLicenseIDSundew is generating a license for ER2.
"Injecting license into scan service"Sundew is injecting the generated license into ER2.
"License won't be generated/refreshed in this iteration", "ID", s.er2Status.lastIssuedLicenseID, "checks (intervals)", s.Config.GeneratingLicenseIterval-s.er2Status.lastIssuedLicenseNo action is required from Sundew for this iteration regarding licensing.
"Not active license or product not licensed response received", "http ret code", cSundew has received an invalid license status from Oleander.
"Scan service stopped"Sundew is stopping ER2.
"Unexpected error code in response for /license/status", "http ret code", cSundew asked Oleander for the license status but got an unexpected response.

Error Log Messages

This section lists the various error messages that Data Discovery and Classification sends to CipherTrust Manager log.

OLEANDER ERROR

Error MessageComment/Explanation
Error connecting to the scan serviceThis error means a connectivity issue between the oleander and the sundew/ER2.
DDC Error creating the database schema.: error executing http request. Code: 500To check the connectivity with Hadoop external data base a schema is created. So this means that there is no connectivity with Hadoop. (also, possibly related to "Error creating the PQS database schema" in the UI)
"CLIENT_CREDENTIAL_PARTITION is not set"CLIENT_CREDENTIAL_PARTITION variable is not set in the config object.
"[Background-Processes] Error retrieving license from DMV", "error", errOleander GetLicenses request against DMV has failed. This error could have been caused by DMV being down.
"[Background-Processes] Error killing all agents selections"When the oleander instance loses its license or the current license expires, all ongoing agent selections will stop. This error is caused by an internal Oleander issue while this agent selections are being shut down.
"[Background-Processes] Error killing all scan watchers"When the oleander instance loses its license or the current license expires, all ongoing scan tracking will stop. This error is caused by an internal Oleander issue during this scan tracking shut down.
"[Background-Processes] Error removing all scan schedules due to DDC not licensed"When the oleander instance loses its license or the current license expires, all scheduled scans will be stopped. This error is caused by an internal Oleander issue during this scheduled scans stopping.
"[Background-Processes] Error starting agent selection for datastores"The listed Data Stores have no agent available.
"[Background-Processes] Error starting scans watchers"When the oleander instance receives a valid license from DMV, all stopped agent selections must be resumed. This error is caused by an internal Oleander issue during this agent selections resuming.
"[Background-Processes] Error starting cron schedules"When the oleander instance receives a valid license from DMV, all stopped scheduled scans must be resumed. This error is caused by an internal Oleander issue during this scheduled scans resuming.
"[Background-Processes] Error trying to migrate the PQS database"During the PQS configuration, an error occurred trying to apply the changesets to update the Database, create the tables, etc...
"[Background-Processes] Error creating cron", "error", errBackground_processes service constantly creates crons for license status checking against DMV, this error is caused by an internal Oleander issue during the creation of one of this crons.
"[Background-Processes] Error with unmarshal."Any "unmarshal/unmarshalling" error is caused by an internal Oleander issue converting a golang object to JSON format or vice versa.
"[Background-Processes] Error while trying to update status to FAILED for datastore.", "name", ds.Name, "error", errWhen background_process services gets an invalid or expired license from DMV all running scans must be stopped and set as FAILED, this message indicates an internal Oleander error changing the scan status for some scan.
"[Background-Processes] Error while trying to retrieve scans from background processes table"When the oleander instance receives a valid license from DMV, all stopped normal scans must be resumed. This error is caused by an internal Oleander issue accessing the background processes table, which contains all the information for the scans resuming.
"[Background-Processes] Watcher has failed updating scan status for scan", "name", sc.Scan.Name, "error", errbackground_processes service has the responsibility to track the running scans and update their Oleander status, this error message indicates an internal Oleander issue updating the scan_process table.
"Cannot retrieve the HDFS settings", "error", errConnectivity or internal Oleander error trying to retrieve HDFS settings from Citrus.
"Cannot retrieve the PQS settings", "error", errConnectivity or internal Oleander error trying to retrieve PQS settings from Citrus.
"Cannot find the country", "error", errWhen a user creates a BranchLocation and he sets a country that is not registered in our DB.
"Cannot find the state", "error", errWhen a user creates a BranchLocation and he sets a state ID that is not registered in our DB.
"Trying to verify if the country has states", "error", errWhen a user creates a BranchLocation and he sets a state "Name" that is not registered in our DB.
"Missing tag %s for the default classification profiles", rWhen inserting default classification profiles, there is no tag that matches the correct Regulation
"[Datastores] Error encrypting connection for datastore: ", "Name", d.NameError when calling Scrim Helper for the encryption of the Connection field for a datastore.
"[Datastores] Error while trying to create background process resource for datastore: ", "Name", d.NameWhen a datastore is created, a new row is inserted into the Background Processes table for further tracking, this error message indicates an internal Oleander issue inserting that row.
"[Datastores] Error selecting agent for datastore ", "Name", dsAAS.Name, "error", errNo suitable agent has been found for this datastore.
"[Datastores] Error while trying to retrieve datastore for background process, agent selection might fail: ", "error", errError retrieving a datastore from DB for background processes purposes in a datastore.update operation.
"[Datastores] Error running automatic agent selection", "error", errAgentUpdateAn internal Oleander error has occurred while trying to update the status of a datastore during the automatic agent selection.
"[Datastores] Error while trying to unmarshal datastore from background processes"An internal Oleander error has occurred while trying to translate a JSON object to a golang object while recovering the automatic agent selections.
"Error closing the json file", "error", errOleander failed trying to close a JSON file.
"Error trying to close the families json file"Oleander reads a families JSON file for tartup DB population. This error message indicates an internal Oleander error while closing this file.
"Error initializing the account", "error", *errPtrOleander failed trying to set the initialization status to the accounts map.
"Error closing oleander", "error", errOleander service could not be closed.
"Error starting background processes", "error", errSome error has occurred trying to execute all background processes.
"Error connecting to HDFS", "error", errThis happens when the scan fails because there is no HDFS connectivity.
"Error trying to close the info types json file"Oleander reads an infotypes JSON file for startup DB population. This error message indicates an internal Oleander error while closing this file.
"Error connecting to PQS", "error", errThis happens when the scan fails because there is no PQS connectivity.
"Error closing the temporary file", "FileName", f.Name(), "error", errOleander failed closing the temporary file used for decrypting the raw data file.
"Error deleting the temporary file", "FileName", f.Name(), "error", errOleander failed deleting the temporary file used for decrypting the raw data file.
"Error trying to close the zip file", "error", merry.Wrap(err).WithHTTPCode(http.StatusBadRequest)Oleander failed closing the zip file used for decrypting the raw data file.
"Error changing the scan status", "error", errInternal Oleander error while trying to update the scan status in the Scan Process table.
"[Scan-Launcher] Error while trying to create background process resource for datastore", "name", rsc.NameOleander inserts a row in the Background Processes table for further scan tracking - this message indicates an internal Oleander error while performing this insert.
"[Scan-Launcher] The scan watcher returned an error", "error", errGeneric error message for any issue during the scan watcher process.
"[Scan-Launcher] Agent not found for datastore", "DS name", s.ScanDatastores[i].Datastore.Name, "error", errThe listed Data Stores have no agent available.
"[Scan-Launcher] Error getting absolute paths", "DS name", s.ScanDatastores[i].Datastore.Name, "error", errOleander was unable to retrieve the absolute paths of the mentioned datastore for further scan execution.
"[Scan-Launcher] Error getting connection path", "DS name", s.ScanDatastores[i].Datastore.Name, "error", errOleander was unable to retrieve the connection paths of the mentioned datastore for further scan execution.
"[Scan-Launcher] Error retrieving the oleander context"Error while generating the Oleander service user. (this is the context for executing actions on behalf of the itself, instead of a specific user).
"[Scan-Launcher] Error while validating the scan"This is a generic error, one of the steps of the validation has failed. (could be that some datastores are not ready, a probe has failed, etc)
"[Scan-Launcher] Error while retrieving extensions"The extensions necessary for the scan execution could not be retrieved from the DB.
"[Scan-Launcher] Unable to initialize background process"The background process object could not be initialized so the scan watcher cannot start.
"[Scan-Actions] Error found while trying to delete background process resource"When Oleander has finished tracking a scan it removes the corresponding row from background processes table - this error message indicates an internal Oleander issue removing that row.
"[Scan-Actions] Error trying to execute the Scan scheduled run", "error", errOleander failed trying to add a scan schedule for a scan.
"Error changing the scan status", "error", errGeneric error message for an issue during the update of the scan status.
"[Scan-Watchers] Watcher has failed getting scan status from scanned service", "scan", sc.Scan.Name, "error", errThis indicates an underlying connectivity issue with Sundew.
"[Scan-Watchers] Watcher has failed updating scan status", "scan", sc.Scan.Name, "error", errError updating the scan status in the scan process table.
"[Scan-Watchers] Error processing the report: ", "error", errOleander scan collector has failed trying to create the scan collector background process for the mentioned scan.
"[Scan-Watchers] Scan aborted, maximum wait for scan results exceeded", "MaxTimeInterruptedState(minutes)", o.Config.Er2MaxInterruptedTime/60, "scan", sc.Scan.Name, "current status", sc.Scan.ScanProcess.Status, "scan service status", er2MappedStatusThe scan has been in INTERRUPTED er2 state for too long, when it exceeds the timeout the status is changed to FAILED in DDC.
"Error trying to parse er2 polling frequency from env"Oleander failed trying to read the ER2 POLLING FREQUENCY env variable from the config object.
"Error while trying to retrieve scans from background processes table", "error", errOleander tried to retrieve all SCAN rows in the background processes table but it failed.
"Error trying to recover the scan watchers", "error", errOne of the scan watchers instantiated by the recovery system has returned an error and stopped working.
"Wrong datastore credentials"Oleander was unable to reach a datastore due to credentials failure.
"Wrong target path defined"A scan has failed because the target path defined was not valid.
"Wrong db schema in target path"A scan has failed because the db schema defined was not valid.
"Wrong db table in target path"A scan has failed because the DB defined was not valid.
"Wrong defined file extension in target path"A scan has failed because a file was specified without an extension.
"Error connecting to the scan service"Oleander is unable to connect with ER2.
"Error processing the scan reports"Generic error while trying to process a scan report.
"No Data Allowance Licensing detected"Oleander does not have a Data Allowance record.
"Error reading the scan report"Generic error while trying to read a scan report.
"Probing path can be launched only on folders. Files are not supported"Scan failed because a file was specified as target instead of a folder.
"Probing a File or Directory that does not exist"Scan failed because the specified directory does not exist.

SUNDEW ERROR

Error MessageExplanation
"CLIENT_CREDENTIAL_PARTITION is not set."CLIENT_CREDENTIAL_PARTITION variable is not set in the config object.
"Error trying to ask for license status", "error", errSundew failed trying to request DDC status from Oleander.
"Error trying to start the scan service", "error", errSundew failed trying to start ER2.
"Connectivity test to the scan service failed", "error", conErrSundew failed trying to ping ER2. ER2 is down.
"Error during validation of received license", "error", errSundew failed trying to validate the DDC license retrieved from Oleander.
"Error parsing the license ID", "error", errSundew failed trying to parse the DDC license ID received from Oleander.
"Error while injecting license inside scan service", "error", errSundew failed trying to inject the generated license into ER2.
"Error stopping scan service", "error", errSundew failed trying to stop ER2.
"Error closing the response body", "error", errSundew failed trying to close the HTTP response body from a request.
"Error closing sundew", "error", errError when trying to close the Sundew service.