|
Home > |
|---|
Access the partition-level commands.
Note: The partition command with no options shows the partition commands available to be used in the current slot.
The availability of partition commands changes according to four possible scenarios:
- the current slot is the HSM administrative partition for an HSM with firmware version 6.22.0 or newer
- the current slot is an application partition that has its own SO (a PPSO partition), on an HSM with firmware version 6.22.0 or newer
- the current slot is a separate-but-not-independent application partition that is administered by the HSM SO, and does not have its own separate SO (meaning, this is a legacy-style partition) on an HSM with firmware version 6.22.0 or newer
- the current slot is the HSM administrative partition and application partition for an HSM with firmware older than version 6.22.0 (meaning, this is a true legacy partition).
No single partition type has access to all the possible partition commands within lunacm.
(These are the commands that you see if the current-slot partition is the initialized HSM's administrative partition, while the HSM is at firmware version 6.22.0 or newer. Some of these commands act on the current-slot partition; some have a -slot option to direct their action to another partition/slot.)
partition
archive
changepolicy
clear
clone
contents
create
createchallenge
delete
policyTemplateCHange
policyTemplateCReate
policyTemplateDelete
policyTemplateLIst
policyTemplateLOad
policyTemplateSAve
policyTemplateSHow
resetpw
resize
restoresim3file
setlegacydomain
showinfo
showmechanism
showpolicies
| Parameter | Shortcut | Description |
|---|---|---|
| archive | ar | > Partition archive management commands. See partition archive. |
| changepolicy | changepo | Change the Partition Policy value. See partition changepolicy |
| clear | clr | Delete all of the user's token objects. See partition clear. |
| clone | clo | Clone user objects. See partition clone. |
| contents | con | Show the contents of the application partition. See partition contents. |
| create | crp | Create the application partition. See partition create. |
| createchallenge | crc | Create the user challenge. See partition createchallenge. |
| delete | del | Delete an application partition. See partition delete. |
| policyTemplateCHange | tch | Modify policy settings. See partition policyTemplateChange . |
| policyTemplateCReate | tcr | Create partition policy template . See partition policyTemplatecreate . |
| policyTemplateDelete | td | Delete partition policy template . See partition policyTemplateDelete . |
| policyTemplateLIst | tli | List partition policy templates . See partition policyTemplateList. |
| policyTemplateLOad | tchlo | Load partition policy template . See partition policytemplateload . |
| policyTemplateSAve | tsa | Save partition policy template . See partition policyTemplateSave . |
| policyTemplateSHow | tsh | Show partition policy template . See partition policyTemplateShow . |
| resetpw | rp | Reset the partition password. See partition resetpw. |
| resize | res | Re-size an application partition. See partition resize. |
| restoresim3 | rsim3f | Restore user objects (using SIM3). See partition restoresim3. |
| setlegacydomain | sld | Set the legacy domain. partition setlegacydomain. |
| showinfo | si | Display partition information. See partition showinfo. |
| showmechanism | showm | Show all available mechanisms. See partition showmechanism . |
| showpolicies | sp | Get partition policy information. See partition showpolicies. |
(Same as for legacy-style partition, later on this page, except that this version of the partition command set does include an init command for the PPSO application partition. These are the commands that you see if the current-slot application partition was created using the "-slot" option while the HSM was at firmware version 6.22.0 or newer.)
partition
archive
changepolicy
clear
clone
contents
init
restoresim3
setlegacydomain
showinfo
showmechanism
showpolicies
| Parameter | Shortcut | Description |
|---|---|---|
| archive | ar | > Partition archive management commands.See partition archive. |
| changepolicy | changepo | Change the Partition Policy value. See partition changepolicy |
| clear | clr | Delete all of the user's token objects. See partition clear. |
| clone | clo | Clone user objects. See partition clone. |
| contents | con | Show the contents of the user partition. See partition contents. |
| init | in | Initialize an application partition. See partition init. |
| restoresim3 | rsim3 | Restore user objects (using SIM3). See partition restoresim3. |
| setlegacydomain | sld | Set the legacy domain. partition setlegacydomain. |
| showinfo | si | Display partition information. See partition showinfo. |
| showmechanism | showm | Show all available mechanisms. See partition showmechanism . |
| showpolicies | sp | Get partition policy information. See partition showpolicies. |
(Same as for PPSO partition, above, except there is no partition init command for the legacy application partition. These are the commands that you see if the current-slot application partition was created using the "-label" option while the HSM was at firmware version 6.22.0 or newer.)
partition
archive
changepolicy
clear
clone
contents
createchallenge
restoresim3
setlegacydomain
showinfo
showmechanism
showpolicies
| Parameter | Shortcut | Description |
|---|---|---|
| archive | ar | > Partition archive management commands. See partition archive. |
| changepolicy | changepo | Change the Partition Policy value. See partition changepolicy |
| clear | clr | Delete all of the user's token objects. See partition clear. |
| clone | clo | Clone user objects. See partition clone. |
| contents | con | Show the contents of the user partition. See partition contents. |
| createchallenge | crc | |
| restoresim3 | rsim3 | Restore user objects (using SIM3). See partition restoresim3. |
| setlegacydomain | sld | Set the legacy domain. partition setlegacydomain. |
| showinfo | si | Display partition information. See partition showinfo. |
| showmechanism | showm | Show all available mechanisms. See partition showmechanism . |
| showpolicies | sp | Get partition policy information. See partition showpolicies. |
(These are the commands that you see if the current-slot partition is the initialized HSM's administrative partition, while the HSM is at firmware version older than 6.22.0. )
partition
archive
changepolicy
changepw
clear
clone
contents
create
login
logout
recoveryinit
recoverylogin
resetpw
restoreSIM2
restoreSIM3
setlegacydomain
showinfo
showmechanism
showpolicies
| Parameter | Shortcut | Description |
|---|---|---|
| archive | ar | > Partition archive management commands. See partition archive. |
| changepolicy | changepo | Change the Partition Policy value. See partition changepolicy |
| changepw | changepw | Change the partition password. See partition changepw. |
| clear | clr | Delete all of the user's token objects. See partition clear. |
| clone | clo | Clones user objects. See partition clone. |
| contents | con | Show the contents of the user partition. See partition contents. |
| create | f | Create the user partition. See partition create. |
| login | logi | Login to the HSM as user. See partition login. |
| logout | logo | Logout from the HSM as user. See partition logout. |
| recoveryinit | ri | Setup/configure User for "Recovery Login" (formerly "HA Init", not related to load balancing). See partition recoveryinit. |
| recoverylogin | rl | Login as the User using "Recovery Login" (formerly "HA Login", not related to load balancing). See partition recoverylogin. |
| resetpw | resetpw | Reset the partition password. See partition resetpw. |
| restoresim2 | rsim2 | Restore user objects (using SIM2). See partition restoresim2. |
| restoresim3 | rsim3 | Restore user objects (using SIM3). See partition restoresim3. |
| setlegacydomain | sld | Set the legacy domain. partition setlegacydomain. |
| showinfo | si | Display partition information. See partition showinfo. |
| showmechanism | showm | Show all available mechanisms. See partition showmechanism . |
| showpolicies | sp | Get partition policy information. See partition showpolicies. |