Requirements for IDT-Capable GuardPoints

IDT-Capable GuardPoints are available for Linux with CTE 6.3.1 or later. . All versions of CM work with IDT-Capable GuardPoints.

The host server must use the Advanced Encryption Standard instruction set (AES-NI).

The policy assigned to the IDT-Capable GuardPoint must be an “in-Place Data Transformation” and use an XTS-AES 256 encryption key.

In order to create an IDT-Capable GuardPoint on a raw device, the device must be either:

• Exported from an external storage system to the host device.

• On a locally-attached disk.

Devices protected by an IDT-Capable GuardPoint cannot currently be initialized/added as physical volumes for use by LVM. When LVM support is added, it will be announced in the CTE Release Notes.

Existing devices divided into one or more logical partitions cannot be guarded as IDT-Capable Device GuardPoints. Logical partitions in such devices cannot be accessed or separately guarded after guarding the device.

For example, the logical partition /dev/sda1 or /dev/sda2 inside /dev/sda cannot be accessed after guarding /dev/sda as IDT-Capable GuardPoint. Using /dev/secvm/dev/sda1 is invalid as /dev/secvm/dev/sda1 is not a GuardPoint and cannot be guarded, and, as such, would not provide access to clear-text data on /dev/sda1. However, you can guard individual partitions, such as /dev/sda1 or /dev/sda2, as IDT-Capable GuardPoints without guarding the entire /dev/sda device.