Use the instructions on this page to change/rotate the secrets on any of the indicated PED iKeys.
From time to time, it might be necessary to change the secret associated with
>Regular credential rotation as part of your organization's security policy
>Compromise of a role or secret due to loss or theft of a PED key
>Personnel changes in your organization or changes to individual security clearances
>Changes to your security scheme (implementing/revoking M of N, PINs, or shared secrets)
The procedure for changing a PED key credential depends on the type of key. Procedures for each type are provided below.
CAUTION! If you are changing a multifactor quorum credential that is shared among multiple HSMs/partitions/roles, always keep at least one copy of the old keyset until the affected HSMs/partitions/roles are all changed to the new credential. When changing multifactor quorum credentials, you must always present the old keyset first; do not overwrite your old PED keys until you have no further need for them.
>Orange Remote PED Vector PED key
Blue HSM SO PED key
The HSM SO can use this procedure to change the HSM SO credential.
To change the blue HSM SO PED key credential
1.In LunaSH, log in as HSM SO.
lunash:> hsm login
2.Initiate the PED key change.
lunash:> hsm changePw
3.You are prompted to present the original blue PED key(s) and then to create a new HSM SO keyset. See Creating PED keys.
Red HSM Domain PED key
It is not possible to change an HSM's cloning domain without factory-resetting the HSM and setting the new cloning domain as part of the standard initialization procedure.
CAUTION! If you set a different cloning domain for the HSM, you cannot restore the
Orange Remote PED Vector PED key
The HSM SO can use this procedure to change the Remote PED Vector (RPV) for the HSM.
To change the RPV/orange key credential
1.In LunaSH, log in as HSM SO.
lunash:> hsm login
2.Initialize the RPV.
lunash:> hsm ped vector init
You are prompted to create a new Remote PED key. See Creating PED keys.
3.Distribute a copy of the new orange key to the administrator of each Remote PED server.
Blue Partition SO PED key
The Partition SO can use this procedure to change the Partition SO credential.
To change a blue Partition SO PED key credential
1.In LunaCM, log in as Partition SO.
lunacm:> role login -name po
2.Initiate the PED key change.
lunacm:> role changepw -name po
3.You are prompted to present the original blue key(s) and then to create a new Partition SO keyset. See Creating PED keys.
Red Partition Domain PED key
If you are using Luna HSM Firmware 7.7.2 and older, it is not possible to change a partition's cloning domain. A new partition must be created and initialized with the desired domain. The new partition will not have access to any of the original partition's backups. It cannot be made a member of the same HA group as the original.
Using Luna HSM Firmware 7.8.0 and newer, each partition can support up to three different cloning domains, allowing your sensitive keys and objects to remain within the cryptographic perimeter of the HSM while:
>migrating objects from one domain to another
>splitting domains
>rotating or rolling-over or refreshing your partition domain secrets as part of mandated periodic changes of credential/authentication, just as you would with passwords for
•appliance administration (including network, logging, ntp. tamper response, etc.)
•HSM or partition roles
–container/partition administrative access
–client access for crypto operations on keys and objects
•etc.
To change the domain secret
See Updating or rotating cloning domain secrets.
Black Crypto Officer PED key
The Crypto Officer can use this procedure to change the Crypto Officer credential.
To change a black Crypto Officer PED key credential
1.In LunaCM, log in as Crypto Officer.
lunacm:> role login -name co
2.Initiate the PED key change.
lunacm:> role changepw -name co
3.You are prompted to present the original black key(s) and then to create a new Crypto Officer keyset. See Creating PED keys.
Gray Crypto User PED key
The Crypto User can use this procedure to change the Crypto User credential.
To change a gray Crypto User PED key credential
1.In LunaCM, log in as Crypto User.
lunacm:> role login-name cu
2.Initiate the PED key change.
lunacm:> role changepw -name cu
3.You are prompted to present the original gray key(s) and then to create a new Crypto User keyset. See Creating PED keys.
NOTE The Luna PED screen prompts for a black PED key for any of
>"User",
>"Crypto Officer",
>"Limited Crypto Officer",
>"Crypto User".
The Luna PED is not aware that the key you present has a black or a gray sticker on it. The colored stickers are visual identifiers for your convenience in keeping track of your PED keys. You differentiate by how you label, and how you use, a given physical key that the Luna PED sees as "black" (once it has been imprinted with a secret).
White Audit User PED key
The Audit User can use this procedure to change the Audit User credential.
To change the white Audit User PED key credential
1.Log into LunaSH as audit.
2.Log in as the Audit User.
lunash:> audit login
3.Initiate the PED key change.
lunash:> audit changePwd
4.You are prompted to present the original white key(s) and then to create a new Audit User keyset. See Creating PED keys.
