network interface
Configure the appliance network interfaces. You can use static IP addressing or DHCP. Static addressing is the default.
User Access
admin, pseoperator
Syntax
network interface
dhcp
delete
static
network interface -device <netdevice> -ip <IP_address> -netmask <IP_address> [-gateway <IP_address>] [-force]
|
Argument(s) |
Shortcut |
Description |
|---|---|---|
|
delete |
del |
Delete the network configuration for a network interface (eth0 or eth1). See network interface delete. |
|
-device <netdevice> |
-d |
Specifies the interface you want to configure. Valid values: eth0, eth1 |
|
dhcp |
dh |
Set a network interface with a DHCP IP configuration. See network interface dhcp. |
|
-force |
-f |
Force the action without prompting. |
|
-gateway <IP_address> |
-g |
Specifies the gateway to assign to the specified device. |
|
-ip <IP_address> |
-i |
Specifies the IP address to assign to the specified device. |
|
-netmask <IP_address> |
-n |
Specifies the network mask, in dotted-decimal format (for example, 255.255.255.0), to assign to the specified device. |
|
static |
s |
Sets a network interface with a static IP configuration. See network interface static. |
