hsm showinfo

Display HSM-level information.

NOTE   The hsm commands appear only when LunaCM's active slot is set to the administrative partition.

Syntax

hsm showinfo

Luna PCIe HSM 7 Example

lunacm:> hsm showinfo

        Partition Label -> myPCIeHSM
        Partition Manufacturer -> SafeNet
        Partition Model -> Luna K7
        Partition Serial Number -> 67842
        Partition Status -> L3 Device
        HSM Part Number -> 808-000048-002
        HSM Serial Number -> 67842
        Token Flags ->
                CKF_RNG
                CKF_RESTORE_KEY_NOT_NEEDED
                CKF_TOKEN_INITIALIZED
        RPV Initialized -> No
        Slot Id -> 16
        Session State -> CKS_RW_SO_FUNCTIONS
        Role Status ->   SO logged in

        Partition SMK OUIDs:
                SMK-FW4: Not Initialized
                SMK-FW6: Not Initialized
                SMK-FW7-FM: Not Initialized
                SMK-FW7-Rollover: Not Initialized
                SMK-FW7-Primary: 2a0000003a00000102090100

        Extended Token Flags ->
                TOKEN_KCV_CREATED
        Partition OUID -> 000000000000000002090100

        Partition Storage:
                Total Storage Space:  655360
                Used Storage Space:   0
                Free Storage Space:   655360
                Object Count:         0
                Overhead:             16192

        *** The HSM is NOT in FIPS approved operation mode. ***

        FM HW Status -> FM Ready
        Firmware Version -> 7.8.4
        Bootloader Version ->  1.1.5
        Rollback Firmware Version -> 7.4.2

        System Times:
                HSM  : Wed Nov 27 20:20:21 UTC 2024
                Host : Wed Nov 27 20:20:21 UTC 2024
                Difference: 0 sec

        Environmental:
                Fan 1 Status                            : active
                Fan 2 Status                            : active
                Battery Voltage                         : 3.093 V
                Battery Warning Threshold Voltage       : 2.750 V
                System Temp                             : 64 deg. C
                System Temperature Warning Threshold    : 75 deg. C

        HSM Storage:
                Total Storage Space:  67108864
                Used Storage Space:   7315283
                Free Storage Space:   59793581
                Allowed Partitions:   1
                Number of Partitions: 1

        License Count:
                1. 621000068-000 Test Cert : K7 Base
                2. 621010185-003 Key backup via cloning protocol
                3. 621000138-001 Controlled tamper recovery
                4. 621000134-002 Enable 64 megabytes of object storage
                5. 621000021-002 Maximum performance
                6. 621000135-002 Enable allow decommissioning
                7. 621000154-001 Enable decommission on tamper with policy off


Command Result : No Error

NOTE    

>The System Times field does not appear until the HSM time has been synchronized with the host system using lunacm:> hsm time sync.

>Starting with Luna HSM Firmware 7.7.0, this command reports 671120 bytes of overhead under HSM Storage after initialization.

>If you are migrating a Secure Master Key (SMK) from a Luna 6 HSM to a Luna 7 HSM, in addition to the SMK-FW6, the SMK-FW4 on the Luna 7 HSM is also overwritten by a new one (even if you have not initialized an SMK-FW4 on the Luna 6 HSM by a prior migration) and this command reports the presence of an SMK-FW4 on the Luna 7 HSM.

Luna Backup HSM 7 Example

lunacm:> hsm showinfo

        Slot Id -> 126
        Partition Label -> myG7pwd
        Partition Serial Number -> 596426
        Partition Model -> Luna G7
        Partition Manufacturer -> SafeNet
        Partition Status -> L3 Device, OK
        Session State -> CKS_RW_PUBLIC_SESSION
        Role Status ->   none logged in
        RPV Initialized -> No

        Partition Cloning Version -> 1
        Partition FM Status -> FM Disabled

        Partition SMK OUIDs:
                SMK-FW4: Not Initialized
                SMK-FW6: Not Initialized
                SMK-FW7-FM: Not Initialized
                SMK-FW7-Rollover: Not Initialized
                SMK-FW7-Primary: Not Initialized


        Partition Storage:
                Total Storage Space:  655360
                Used Storage Space:   0
                Free Storage Space:   655360
                Object Count:         0
                Overhead:             24224

        Firmware Version -> 7.7.1
        Bootloader Version ->  1.3.0
        Rollback Firmware Version -> 7.3.2
        HSM Part Number -> 808-000064-005

        HSM Storage:
                Total Storage Space:  33816576
                Used Storage Space:   761724
                Free Storage Space:   33054852
                Allowed Partitions:   100
                Number of Partitions: 3

        Environmental:
                System Temperature :  46 deg. C

        License Count:
                1. 621000121-000 G7 BU 32M Base CUF December 7 2018

        *** The HSM is NOT in FIPS 140-2 approved operation mode. ***

Command Result : No Error

NOTE    

>Starting with Luna Backup HSM 7 Firmware 7.7.1, this command reports 679584 bytes of overhead under HSM Storage after initialization.

>If you are migrating a Secure Master Key (SMK) from a Luna 6 HSM to a Luna 7 HSM, in addition to the SMK-FW6, the SMK-FW4 on the Luna 7 HSM is also overwritten by a new one (even if you have not initialized an SMK-FW4 on the Luna 6 HSM by a prior migration) and this command reports the presence of an SMK-FW4 on the Luna 7 HSM.