Other Appliance Logging
Output from the lunash:>hsm information show command includes additional log data as shown in the following example.
[local_host] lunash:>hsm information show HSM Event Counters: Operation Requests: 21998 Operation Errors: 1707 Crypto Operation Requests: 0 Crypto Operation Errors: 0 Critical Events: 0 Non-Critical Events: 34 Command Result : 0 (Success)
sysstatd, snmp and ntls periodically make calls to the HSM and these calls result in incremented counters for Operation Requests and Operation Errors. luna-snmp polls the HSM every minute and increments these two counters by 49 and 1 respectively. sysstatd polls the HSM with each rotation of the LCD messages (~15 to 20 seconds) and increments these two counters by 25 and 3 respectively. ntls polls the HSM repeatedly and increments the Operation Requests counter by more than 600 per minute.
Crypto Operation Requests and Crypto Operation Errors reflect counts from client application requests to the HSM.
Critical Events are catastrophic failure of the HSM firmware as reported by the HSM itself. An increment in this counter also results in a crash log file and a syslog message (messages) similar to the following example:
2012 Feb 22 03:15:13 LunaSA5 local6 crit oamp[2318]: CRIT: Fatal error 0x00300203 2012 Feb 22 03:15:13 LunaSA5 local6 info oamp[2318]: info : 0 : HSM critical event detected. Dual port dump generated : hsm_dump_20120222031513
Non-Critical Events are either ERR or INFO messages. A count the INFO and ERR messages in the following excerpt reflects the 34 reported in the example above.
2014 Aug 21 07:18:14 local_host local6 info oamp[2100]: ----- HSM Logging started 2014 Aug 21 07:18:14 local_host local6 info oamp[2100]: INFO: Warm boot 2014 Aug 21 07:18:14 local_host local6 info oamp[2100]: INFO: FW Rev 6.2.1-10 2014 Aug 21 07:18:14 local_host local6 info oamp[2100]: INFO: File: SOURCE/LUNA2/MAIN_MOD/main.c 2014 Aug 21 07:18:14 local_host local6 info oamp[2100]: INFO: Date: Jul 29 2011, Time: 16:53:13 2014 Aug 21 07:18:14 local_host local6 info oamp[2100]: INFO: POWER-UP LOG DUMP START 2014 Aug 21 07:18:14 local_host local6 info oamp[2100]: INFO: Power-up log created 2014 Aug 21 07:18:14 local_host local6 info oamp[2100]: INFO: Appending power-up log... 2014 Aug 21 07:18:14 local_host local6 info oamp[2100]: INFO: HSM is powered-up 2014 Aug 21 07:18:14 local_host local6 info oamp[2100]: INFO: HSM time: 0 min (YYYY:MM:DD:hh:mm:ss = 0000:01:01:00:00:05.04) 2014 Aug 21 07:18:14 local_host local6 err oamp[2100]: ERR: RTC: lost all power 2014 Aug 21 07:18:14 local_host local6 err oamp[2100]: ERR: RTC: zeroized on power loss 2014 Aug 21 07:18:14 local_host local6 info oamp[2100]: INFO: RTC: re-configuring...passed. Clock restarted. 2014 Aug 21 07:18:14 local_host local6 info oamp[2100]: INFO: Zeroizing HSM after decommission...LOG(INFO): POWER-UP LOG DUMP END 2014 Aug 21 07:18:14 local_host local6 info oamp[2100]: INFO: Erasing power-up log 2014 Aug 21 07:18:14 local_host local6 info oamp[2100]: INFO: HSM time: 0 min (YYYY:MM:DD:hh:mm:ss = 0000:01:01:00:00:53.21) 2014 Aug 21 07:18:14 local_host local6 info oamp[2100]: INFO: MM_Init OK 2014 Aug 21 07:18:14 local_host local6 info oamp[2100]: INFO: PM_Init OK 2014 Aug 21 07:18:14 local_host local6 info oamp[2100]: INFO: I2C_Init OK 2014 Aug 21 07:18:14 local_host local6 info oamp[2100]: INFO: RTC_Init OK 2014 Aug 21 07:18:14 local_host local6 info oamp[2100]: INFO: NVRAM_Init OK 2014 Aug 21 07:18:14 local_host local6 info oamp[2100]: INFO: CGX Ver: 0xC0020802 HA Mode: 0x00000000 KeyStatus: 0x10000000 0x0000006D ES Flags: 0x00000002 2014 Aug 21 07:18:14 local_host local6 info oamp[2100]: INFO: CGX_Init OK 2014 Aug 21 07:18:14 local_host local6 err oamp[2100]: ERR: MTK: security function was zeroized for unknown reason 2014 Aug 21 07:18:14 local_host local6 info oamp[2100]: INFO: MTK_Init OK 2014 Aug 21 07:18:14 local_host local6 info oamp[2100]: INFO: sxl_init OK 2014 Aug 21 07:18:14 local_host local6 info oamp[2100]: INFO: PE1746_Init OK 2014 Aug 21 07:18:14 local_host local6 info oamp[2100]: INFO: RN_Init OK 2014 Aug 21 07:18:14 local_host local6 info oamp[2100]: INFO: OH_Init OK 2014 Aug 21 07:18:14 local_host local6 info oamp[2100]: INFO: CA_AlgorithmSelfTest(): HW disabled, skipping all self tests 2014 Aug 21 07:18:14 local_host local6 info oamp[2100]: INFO: CA_Init OK 2014 Aug 21 07:18:14 local_host local6 info oamp[2100]: INFO: UM_Init OK 2014 Aug 21 07:18:14 local_host local6 info oamp[2100]: INFO: SM_Init OK 2014 Aug 21 07:18:14 local_host local6 info oamp[2100]: INFO: Supported callback I/O v.1 2014 Aug 21 07:18:14 local_host local6 info oamp[2100]: INFO: Supported callback protocol v.1
