token backup login

Log into the backup HSM as HSM SO. This command is used immediately before performing a firmware update on a backup token.

Remember to always log out of the Backup HSM using the token backup logout command.

An external Luna Backup HSM can be USB-connected to a Luna Network HSM 7 appliance for local backup/restore operations.

Luna Network HSM 7 does not pass Luna PED operations and data through to an externally-connected Luna Backup HSM from a Luna PED connected locally to the Luna Network HSM 7.

If the Backup HSM is multifactor quorum-authenticated, then the options for Luna PED connection are:

>local SCP-PED connection directly to the Backup HSM (Luna Backup HSM G5 only)

>Remote PED connection, passed through the Luna Network HSM 7 (Luna Backup HSM G5, Luna Backup HSM 7 v1 or v2, requires minimum Luna Appliance Software 7.7.0, use procedure for Luna Backup HSM 7 Connected to Luna Network HSM 7 Using Remote Multifactor Quorum Authentication)

User Privileges

Users with the following privileges can perform this command:

>Admin

>Operator

Syntax

token backup login -serial <serialnum> [-password <password>]

Argument(s) Shortcut Description
-serial <serialnum> -s Specifies the serial number of the Backup HSM.
-password <password> -p Specifies the Backup HSM SO’s password. If this option is not specified, LunaSH prompts for the password entry.

Example

lunash:>token backup login -serial 496771


  Please enter Token Administrator's password:
  > ********

'token backup login' successful.


Command Result : 0 (Success)