stc hmac show

List the HMAC message digest algorithms you can use for message integrity verification on an STC link.

NOTE   Secure Trusted Channel (STC) changes format for Luna HSM Firmware 7.7.0; LunaSH commands used by the HSM SO for STC are described here for Luna HSM Firmware 7.4.2 and older, and are discontinued for Luna HSM Firmware 7.7.0 and newer.

For Luna HSM Firmware 7.7.0 and newer, only the Partition SO can configure these STC options, using LunaCM (see stcconfig) after the partition is initialized.

You must be logged in as the HSM SO to use this command.

User Privileges

Users with the following privileges can perform this command:

>Admin

>Operator

>Monitor

Syntax

stc hmac show -partition <partition_name>

Argument(s) Shortcut Description
-partition <partition_name>

-p

 Specifies the partition for which you want to display the available HMAC algorithms.

Example

lunash:>stc hmac show -partition partition2

This table lists the HMAC algorithms supported for STC links to the partition. Enabled
algorithms are accepted during STC link negotiation with a client. At least one HMAC
algorithm must be enabled.


 HMAC ID      HMAC Name                                Enabled
__________________________________________________________________

 0            HMAC with SHA 256 Bit                    Yes

 1            HMAC with SHA 512 Bit                    Yes


Command Result : 0 (Success)