hsm stc cipher show

List the symmetric encryption cipher algorithms you can use for data encryption on the secure trusted channel (STC) admin channel. The STC admin channel is local to the appliance, and is used to transmit data between the local services and applications running on the appliance (such as LunaSH, NTLS, and the STC service) and the HSM SO partition.

NOTE   The STC admin channel is configurable using Luna Appliance Software 7.4.0 and older, and Luna HSM Firmware 7.4.2 and older. This feature is not available in Luna HSM Firmware 7.7.0 and newer.

User Privileges

Users with the following privileges can perform this command:

>Admin

>Operator

Syntax

hsm stc cipher show

Example

lunash:>hsm stc cipher show

This table lists the ciphers supported for STC links to the partition. Enabled
ciphers are accepted during STC link negotiation with a client. If all ciphers
are disabled, STC links to the partition are not encrypted.

STC Encryption: On

 Cipher ID    Cipher Name                              Enabled
_________________________________________________________________

 1            AES 128 Bit with Cipher Block Chaining   Yes

 2            AES 192 Bit with Cipher Block Chaining   Yes

 3            AES 256 Bit with Cipher Block Chaining   No



Command Result : 0 (Success)