pedserver -mode show
Queries if PEDserver is currently running, and gets details about PEDserver.
Syntax
pedserver -mode show [-name <registered appliance name>] [-configfile <filename>] [-logfilename <filename>] [-loginfo <0 or 1>] [-logwarning <0 or 1>] [-logerror <0 or 1>] [-logtrace <0 or 1>] [-maxlogfilesize <size>]
Option | Description |
---|---|
-name <registered appliance name> | Specifies the name of the registered appliance to be queried. Applies to server-initiated (peer-to-peer) mode only. |
-configfile <filename> | Optional. Specifies which PEDserver configuration file to use. |
-logfilename <filename> | Optional. Specifies the log file name to which the logger should log messages. |
-loginfo <0 or 1> | Optional. Specifies if the logger should log "info" messages. Set to 0 for no, 1 for yes. |
-logwarning <0 or 1> | Optional. Specifies if the logger should log "warning" messages. Set to 0 for no, 1 for yes. |
-logerror <0 or 1> | Optional. Specifies if the logger should log "error" messages. Set to 0 for no, 1 for yes. |
-logtrace <0 or 1> | Optional. Specifies if the logger should log "trace" messages. Set to 0 for no, 1 for yes. |
-maxlogfilesize <size> | Optional. Specifies the maximum log file size in KB. |
Example
C:\Program Files\Safenet\LunaClient>pedServer –mode show -name hellohi
>Ped Server launched in status mode. Server Information: Hostname: ABC1-123123 IP: 192.10.10.123 Firmware Version: 2.5.0-1 PedII Protocol Version: 1.0.1-0 Software Version: 1.0.5 (10005) Ped2 Connection Status: Connected Ped2 RPK Count 1 Ped2 RPK Serial Numbers (1a123456789a1234) Client Information: Not Available Operating Information: Server Port: 1234 External Server Interface: Yes Admin Port: 1235 External Admin Interface: No Server Up Time: 8 (secs) Server Idle Time: 8 (secs) (100%) Idle Timeout Value: 1800 (secs) Current Connection Time: 0 (secs) Current Connection Idle Time: 0 (secs) Current Connection Total Idle Time: 0 (secs) (100%) Total Connection Time: 0 (secs) Total Connection Idle Time: 0 (secs) (100%) >Show command passed.