|
Home > |
|---|
Rollback the HSM firmware to the previously installed version. Only the previously installed version is available for rollback. Rollback allows you to try a new firmware version (hsm updatefw) without permanently committing to the new version.
Note: LunaCM performs an automatic restart following a firmware rollback.
Note: You must re-initialize the HSM after rolling back the firmware rollback. since re-initialization is a destructive action, ensure that you back up any important materials before running this command.
Note: The lunacm hsm commands appear only when the current slot selected in lunacm is for a locally-installed HSM, such as a SafeNet PCI-E HSM. When lunacm is directed at a slot corresponding to a remote SafeNet Network HSM, the hsm-level commands do not appear, since lunacm has a client-only connection to a remote HSM and therefore cannot log in as SO to a remote HSM. To access HSM commands on the SafeNet Network HSM appliance, you must use the LunaSH.
hsm rollbackfw
lunacm:> hsm login
Please attend to the PED.
Command Result : No Error
lunacm:> hsm rollbackFW
You are about to rollback the firmware.
The HSM will be reset.
Are you sure you wish to continue?
Type 'proceed' to continue, or 'quit' to quit now -> proceed
Rolling back firmware. This may take several minutes.
Firmware rollback passed. Resetting HSM
Command Result : No Error