|
Home > |
|---|
Configure a default IP address and/or port that are used by the ped connect command when establishing a connection to a Remote PED Server. See "ped connect" for more information.
ped set {[-ip <ped_server_ip>] | [-port <ped_server_port_number>]}
| Parameter | Shortcut | Description |
|---|---|---|
| -ip | -i <ped server ip> |
Specifies the default IP Address used by the ped connect command. |
| -port | -p <server port num> |
Specifies the default port used by the ped connect command. Range: 0-65535 |
lunacm:>hsm ped set -ip 106.55.19.59 -port 3456
Command Result : 0 (Success)
lunacm:>hsm ped show
Configured Remote PED Server IP address: 106.55.19.59
Configured Remote PED Server Port: 3456
Ped Client Version 2.0.0 (20000)
Ped Client launched in status mode.
Callback Server is running..
Callback Server Information:
Hostname: local_host
IP: 106.55.9.165
Software Version: 2.0.0 (20000)
Operating Information:
Admin Port: 1501
External Admin Interface: No
Callback Server Up Time: 269788 (secs)
Callback Server Current Idle Time: 269788 (secs)
Callback Server Total Idle Time: 269788 (secs) (100%)
Idle Timeout Value: 1800 (secs)
Number of PED ID Mappings: 0
Number of HMSs: 1
HSM List:
Device Type: PCI HSM
HSM Serial Number: 789654
HSM Firmware Version: 6.30.0
HSM Cmd Protocol Version: 18
HSM Callback IO Version: 1
HSM Callback Protocol Version: 1
HSM Up Time: 269787 (secs)
HSM Total Idle Time: 269787 (secs) (100%)
HSM Current Idle Time: 269787 (secs)
Show command passed.
Command Result : No Error