Home >	LunaCM Command Reference Guide > LunaCM commands

LunaCM commands

This chapter describes the commands available in LunaCM. The commands are described in alphabetical order and provide:

•a brief description of the command function

•the command syntax and parameter descriptions

•usage examples

The following list provides links to the top level commands in the hierarchy. Select a link to display the command syntax or to help you to navigate to the sub-command you need:

•"appid"

•"audit"

•"file display"

•"hagroup"

•"hsm"

•"partition"

•"ped"

•"remotebackup start"

•"slot"

•"srk"

•"stc"

•"stcconfig"

Note: For HSMs with firmware 6.22.0 or newer, login state of a slot is preserved until explicitly ended (such as with "logout" or "deactivate" or closing the application). Therefore, login state persists when you switch slots in lunacm. That is, if you were logged into the partition in slot 1, then set current slot to slot 2, then came back to slot 1, the login state for the partition in slot 1 would still be in force, with no need to reinstate it.

For HSMs with older firmware, changing to a different slot terminates the login state in the original slot, as was always the case.

Open topic with navigation