|
Home > |
|---|
Access the partition-level commands.
Note: The partition command with no options shows the partition commands available to be used in the current slot.
The availability of partition commands changes according to four possible scenarios:
- the current slot is the HSM administrative partition for an HSM with firmware version 6.22.0 or newer
- the current slot is an application partition that has its own SO (a PPSO partition), on an HSM with firmware version 6.22.0 or newer
- the current slot is a separate-but-not-independent application partition that is administered by the HSM SO, and does not have its own separate SO (a legacy-style partition) on an HSM with firmware version 6.22.0 or newer
- the current slot is the HSM administrative partition and application partition for an HSM with firmware older than version 6.22.0 (a true legacy partition).
No single partition type has access to all the possible partition commands within lunacm.
(These are the commands that you see if the current-slot partition is the initialized HSM's administrative partition, while the HSM is at firmware version 6.22.0 or newer. Some of these commands act on the current-slot partition; some have a -slot option to direct their action to another partition/slot.)
partition
archive
changepolicy
clear
clone
contents
create
createchallenge
delete
resetpw
resize
restoresim3file
setlegacydomain
showinfo
showmechanism
showpolicies
| Parameter | Shortcut | Description |
|---|---|---|
| archive | ar | > Partition archive management commands. See "partition archive". |
| changepolicy | changepo | Change the Partition Policy value. See "partition changepolicy" |
| clear | clr | Delete all of the user's token objects. See "partition clear". |
| clone | clo | Clone user objects. See "partition clone". |
| contents | con | Show the contents of the application partition. See "partition contents". |
| create | crp | Create the application partition. See "partition create". |
| createchallenge | crc | Create the user challenge. See "partition createchallenge". |
| delete | del | Delete an application partition. See saw. |
| resetpw | rp | Reset the partition password. See "partition resetpw". |
| resize | res | Re-size an application partition. See "partition resize". |
| restoresim3 | rsim3f | Restore user objects (using SIM3). See "partition restoresim3". |
| setlegacydomain | sld | Set the legacy domain. "partition setlegacydomain". |
| showinfo | si | Display partition information. See "partition showinfo". |
| showmechanism | showm | Show all available mechanisms. See "partition showpolicies". |
| showpolicies | sp | Get partition policy information. See "partition showpolicies". |
(Same as for legacy-style partition, later on this page, except that this version of the partition command set does include an init command for the PPSO application partition. These are the commands that you see if the current-slot application partition was created using the "-slot" option while the HSM was at firmware version 6.22.0 or newer.)
partition
archive
changepolicy
clear
clone
contents
init
restoresim3
setlegacydomain
showinfo
showmechanism
showpolicies
| Parameter | Shortcut | Description |
|---|---|---|
| archive | ar | > Partition archive management commands.See "partition archive". |
| changepolicy | changepo | Change the Partition Policy value. See "partition changepolicy" |
| clear | clr | Delete all of the user's token objects. See "partition clear". |
| clone | clo | Clone user objects. See "partition clone". |
| contents | con | Show the contents of the user partition. See "partition contents". |
| init | in | Initialize an application partition. See "partition init". |
| restoresim3 | rsim3 | Restore user objects (using SIM3). See "partition restoresim3". |
| setlegacydomain | sld | Set the legacy domain. "partition setlegacydomain". |
| showinfo | si | Display partition information. See "partition showinfo". |
| showmechanism | showm | Show all available mechanisms. See "partition showpolicies". |
| showpolicies | sp | Get partition policy information. See "partition showpolicies". |
(Same as for PPSO partition, above, except there is no partition init command for the legacy application partition. These are the commands that you see if the current-slot application partition was created using the "-label" option while the HSM was at firmware version 6.22.0 or newer.)
partition
archive
changepolicy
clear
clone
contents
createchallenge
restoresim3
setlegacydomain
showinfo
showmechanism
showpolicies
| Parameter | Shortcut | Description |
|---|---|---|
| archive | ar | > Partition archive management commands. See "partition archive". |
| changepolicy | changepo | Change the Partition Policy value. See "partition changepolicy" |
| clear | clr | Delete all of the user's token objects. See "partition clear". |
| clone | clo | Clone user objects. See "partition clone". |
| contents | con | Show the contents of the user partition. See "partition contents". |
| createchallenge | crc | |
| restoresim3 | rsim3 | Restore user objects (using SIM3). See "partition restoresim3". |
| setlegacydomain | sld | Set the legacy domain. "partition setlegacydomain". |
| showinfo | si | Display partition information. See "partition showinfo". |
| showmechanism | showm | Show all available mechanisms. See "partition showpolicies". |
| showpolicies | sp | Get partition policy information. See "partition showpolicies". |
(These are the commands that you see if the current-slot partition is the initialized HSM's administrative partition, while the HSM is at firmware version older than 6.22.0. )
partition
archive
changepolicy
changepw
clear
clone
contents
create
login
logout
recoveryinit
recoverylogin
resetpw
restoreSIM2
restoreSIM3
setlegacydomain
showinfo
showmechanism
showpolicies
| Parameter | Shortcut | Description |
|---|---|---|
| archive | ar | > Partition archive management commands. See "partition archive". |
| changepolicy | changepo | Change the Partition Policy value. See "partition changepolicy" |
| changepw | changepw | Change the partition password. See "partition changepw". |
| clear | clr | Delete all of the user's token objects. See "partition clear". |
| clone | clo | Clones user objects. See "partition clone". |
| contents | con | Show the contents of the user partition. See "partition contents". |
| create | f | Create the user partition. See "partition create". |
| login | logi | Login to the HSM as user. See "partition login". |
| logout | logo | Logout from the HSM as user. See "partition logout". |
| recoveryinit | ri | Setup/configure User for "Recovery Login" (formerly "HA Init", not related to load balancing). See "partition recoveryinit". |
| recoverylogin | rl | Login as the User using "Recovery Login" (formerly "HA Login", not related to load balancing). See "partition recoverylogin". |
| resetpw | resetpw | Reset the partition password. See "partition resetpw". |
| restoresim2 | rsim2 | Restore user objects (using SIM2). See "partition restoresim2". |
| restoresim3 | rsim3 | Restore user objects (using SIM3). See "partition restoresim3". |
| setlegacydomain | sld | Set the legacy domain. "partition setlegacydomain". |
| showinfo | si | Display partition information. See "partition showinfo". |
| showmechanism | showm | Show all available mechanisms. See "partition showpolicies". |
| showpolicies | sp | Get partition policy information. See "partition showpolicies". |