CKM_ECIES

Supported Operations

Encrypt and Decrypt	Yes (Single part operation only)
Sign and Verify	No
SignRecover and VerifyRecover	No
Digest	No
Generate Key/Key-Pair	No
Wrap and Unwrap	No
Derive	No
Available in FIPS Mode	No

Key Size Range (bits) and Parameters

Minimum	64
Maximum	571
Parameter	CK_ECIES_PARAM

Description

The Elliptic Curve Integrated Encryption Scheme (ECIES) mechanism, denoted CKM_ECIES, performs single-part encryption and decryption operations. The operations performed are as described in ANSI X9.63-2001.

This mechanism has a parameter, a CK_ECIES_PARAMS structure. This structure is defined as follows:

typedef struct CK_ECIES_PARAMS
{
CK_EC_DH_PRIMITIVE dhPrimitive;
    CK_EC_KDF_TYPE kdf;
    CK_ULONG ulSharedDataLen1;
    CK_BYTE_PTR pSharedData1;
    CK_EC_ENC_SCHEME encScheme;
    CK_ULONG ulEncKeyLenInBits;
    CK_EC_MAC_SCHEME macScheme;
    CK_ULONG ulMacKeyLenInBits;
    CK_ULONG ulMacLenInBits;
    CK_ULONG ulSharedDataLen2;
    CK_BYTE_PTR pSharedData2;
} CK_ECIES_PARAMS;

The fields of this structure have the following meanings:

dhPrimitive	This is the Diffie-Hellman primitive used to derive the shared secret value. Valid value: CKDHP_STANDARD
kdf	This is the key derivation function used on the shared secret value. Valid value: CKD_SHA1_KDF
ulSharedDataLen1	This is the length in bytes of the key derivation shared data.
pSharedData1	This is the key derivation padding data shared between the two parties.
encScheme	This is the encryption scheme used to transform the input data. Valid value: CKES_XOR
ulEncKeyLenInBits	This is the bit length of the key to use for the encryption scheme.
macScheme	This is the MAC scheme used for MAC generation or validation. Valid values: CKMS_HMAC_SHA1CKMS_SHA1 NOTE   The MAC scheme CKMS_SHA1, should only be used for compatability with RSA BSAFE® Crypto-C, which uses a NON-STANDARD MAC scheme, which was defined in the 10/97 X9.63 Draft, but was removed from the released ANSI X9.63-2001 specification.
ulMacKeyLenInBits	This is the bit length of the key to use for the MAC scheme.
ulMacLenInBits	This is the bit length of the MAC scheme output.
ulSharedDataLen2	This is the length in bytes of the MAC shared data.
pSharedData2	This is the MAC padding data shared between the two parties.

The pSharedData1 and pSharedData2 parameters are optional, and if not supplied then they must be NULL and the ulSharedDataLen1 and ulSharedDataLen2 parameters must be zero. With the MAC scheme CKMS_SHA1, any supplied shared data is ignored.

With the encryption scheme CKES_XOR, the ulEncKeyLenInBits parameter MUST be zero. With any other encryption scheme, the ulEncKeyLenInBits parameter must be set to the applicable key length in bits.

With the MAC scheme CKMS_SHA1, the ulMacKeyLenInBits parameter must be 0.  With any other MAC scheme, the ulMacKeyLenInBits parameter must be a minimum of 80 bits, and a multiple of 8 bits.

The ulMacLenInBits parameter must be a minimum of 80 bits, a multiple of 8 bits, and not greater than the maximum output length for the specified Hash.

Constraints on key types and the length of the data are summarized in the following table.

Table 1: ECIES: Key  and Data Length

Function	Key Type	Input Length	Output Length
C_Encrypt	EC public key	any	1 + 2modLen + any + macLen
C_Decrypt	EC private key	1 + 2modLen + any + macLen	any

Where:

>modLen is the curve modulus length

>macLen is the length of the produced MAC

The encrypted data is in the format QE||EncData||MAC, where:

>QE is the uncompressed bit string of the ephemeral EC public key

>EncData is the encrypted data

>MAC is the generated MAC

Return to SafeNet ProtectToolkit-C Mechanisms