sysconf snmp

Enable or disable the SNMP service, or display or configure the SNMP settings for the appliance.

Syntax

sysconf snmp {config | disable | enable | show}

Argument(s)	Shortcut	Description
config	c	Configure the SNMP settings for the appliance. See sysconf snmp config.
disable	d	Disable SNMP on the appliance and stop the SNMP service.
enable	e	Enable SNMP on the appliance and start the SNMP service.
show	s	Display the current SNMP settings for the appliance.

Example

psesh:>sysconf snmp disable

SNMP is disabled
Stopping snmpd:                                            [  OK  ]
SNMP is stopped

Command Result : 0 (Success)

 

psesh:>sysconf snmp enable

SNMP is enabled
Starting snmpd:                                            [  OK  ]
SNMP is started

Command Result : 0 (Success)

 

psesh:>sysconf snmp show

SNMP is running

SNMP is enabled

Current SNMP configuration

###########################################################################
#               SafeNet ProtectServer SNMP v2c snmpd.conf                 #
###########################################################################
agentuser root
syslocation TESTLAB
syscontact TESTCONTACT
com2sec secName 192.168.11.17 COMMUNITY
group secNameGroup v2c secName
view systemview included .1.3.6.1.2.1.1
view systemview included .1.3.6.1.2.1.2
view systemview included .1.3.6.1.2.1.25.1
view systemview included .1.3.6.1.2.1.25.2
view systemview included .1.3.6.1.2.1.25.3
view systemview included .1.3.6.1.2.1.25.4
access secNameGroup "" any noauth exact systemview none none

Command Result : 0 (Success)