Serial communication functions

This section contains functions for using the serial ports on the HSM. Note that in emulation mode, the serial ports on the host system are used.

If you specify serial port 0, the output is redirected to the hsmtrace log.

The following functions are provided by libfmserial.a:

>SERIAL_GetNumPorts

>SERIAL_Open

>SERIAL_Close

>SERIAL_InitPort

>SERIAL_SendData

>SERIAL_WaitReply

>SERIAL_ReceiveData

>SERIAL_FlushRX

>SERIAL_GetControlLines

>SERIAL_SetControlLines

>SERIAL_SetMode