network route add
Manually add a network route to the appliance's routing tables.
CAUTION! Use this command only under the advice and supervision of your network administrator.
User Access
admin
Syntax
network route add <route_type> <IP_address> [-device <interface>] [-metric <metric>] [-netmask <netmask>] -gateway <IP_address>] [-force]
| Argument(s) | Shortcut | Description |
|---|---|---|
| <route_type> |
Specifies the type of route you want to add. Valid values: host, network |
|
| <IP_address> | Specifies the IP address of the route you want to add. | |
| -device <interface> | -d |
Specifies the interface you want to configure. Valid values: eth0, eth1 |
| -metric <metric> | -m |
Specifies the routing metric for the route. Range: 0-65535 |
| -netmask <netmask> | -n | Specifies the network mask for the route, in dotted-decimal format (for example, 255.255.255.0). |
| -gateway <IP_address> | -g | Specifies the IP address of the gateway for the route. |
| -force | -f | Force the action without prompting. |
