sysconf snmp

Enable or disable the SNMP service, or display or configure the SNMP settings for the appliance.

Syntax

sysconf snmp {config | disable | enable | show}

Argument(s)

Shortcut

Description

config

c

Configure the SNMP settings for the appliance. See sysconf snmp config.

disable

d

Disable SNMP on the appliance and stop the SNMP service.

enable

e

Enable SNMP on the appliance and start the SNMP service.

show

s

Display the current SNMP settings for the appliance.

Example

psesh:>sysconf snmp disable
 
SNMP is disabled
Stopping snmpd:                                            [  OK  ]
SNMP is stopped
 
Command Result : 0 (Success)
 
 
 
psesh:>sysconf snmp enable
 
SNMP is enabled
Starting snmpd:                                            [  OK  ]
SNMP is started
 
Command Result : 0 (Success)
 
 
 
psesh:>sysconf snmp show
 
SNMP is running
 
SNMP is enabled
 
Current SNMP configuration
 
###########################################################################
#               SafeNet ProtectServer SNMP v2c snmpd.conf                 #
###########################################################################
agentuser root
syslocation TESTLAB
syscontact TESTCONTACT
com2sec secName 192.168.11.17 COMMUNITY
group secNameGroup v2c secName
view systemview included .1.3.6.1.2.1.1
view systemview included .1.3.6.1.2.1.2
view systemview included .1.3.6.1.2.1.25.1
view systemview included .1.3.6.1.2.1.25.2
view systemview included .1.3.6.1.2.1.25.3
view systemview included .1.3.6.1.2.1.25.4
access secNameGroup "" any noauth exact systemview none none
 
Command Result : 0 (Success)