Security Mode Descriptions

This section describes the security modes that can be selected from the Security Modes group box in the Set Security Flags – All Devices dialog box.

Set All and Clear All Modes

>Click Set All to set all available security flags.

>Click Clear All to remove all security flags.

FIPS 140 Mode

FIPS 140 Mode refers to the security flag settings required to comply with the Federal Information Processing Standards (FIPS) 140 standard.

It is important to note that the product can function outside the scope of this accreditation. Therefore, ensure that the correct configuration is set if this level of FIPS secure operation is required.

The security mode flags set in FIPS 140 mode are shown in the table below.

Restricted Mode

The Restricted Mode security setting is a compromise between performance and security. If Restricted Mode is selected, then the HSM will require all users to identify themselves before cryptographic services are available. This mode also inhibits any clear PINs or sensitive key material from passing through the HSM’s PCIe bus interface but each individual request to the HSM does not need to be signed.

The security mode flags set in Restricted Mode are shown in the table below.

Security Mode Preconfigured Flag Settings

When the FIPS or Restricted security mode buttons are clicked in the Set Security – All Devices dialog box, the status of the flags is changed as shown in the table below (default values). Those settings marked with an asterisk (*) are mandatory in order to implement the requirements for the mode concerned. Additional flags, marked with a plus (+), can be changed if required. See Security Mode Flag Descriptions.

Flag

FIPS 140 Mode

Restricted Mode

Tamper Before Upgrade.

Set*

Cleared+

No Public Cryptography

Set*

Set*

Entrust Compliant

Cleared*

Cleared*

No Clear PINs

Set*

Set*

Authentication Protection

Set*

Cleared*

Lock Security Mode

Set*

Set*

Increased Security Mode

Cleared+

Cleared+

Only Allow FIPS Approved Algorithms.

Set*

Cleared*

Full Secure Messaging Encryption

Cleared+

Cleared+

Full Secure Messaging Signing

Cleared+

Cleared*