pedserver -mode start
Starts up PEDserver.
Syntax
pedserver -mode start [-name <registered appliance name>] [-ip <server_IP>] [-port <server port>] [-configfile <filename>] [-admin <admin port number>] [-eserverport <0 or 1>] [-eadmin <0 or 1>] [-idletimeout <int>] [-socketreadtimeout <int>] [-socketwritetimeout <int>] [-internalshutdowntimeout <int>] [-bgprocessstartuptimeout <int>] [-bgprocessshutdowntimeout <int>] [-logfilename <filename>] [-loginfo <0 or 1>] [-logwarning <0 or 1>] [-logerror <0 or 1>] [-logtrace <0 or 1>] [-maxlogfilesize <size>] [-pinginterval <int>] [-pingtimeout <int>] [-force]
| Option | Description |
|---|---|
| -admin <admin port number> | Optional. Specifies the administration port number. |
| -bgprocessshutdowntimeout <int> | Optional. Specifes the shutdown timeout for the detached process, in seconds. |
| -bgprocessstartuptimeout <int> | Optional. Specifies the startup timeout for the detached process, in seconds. |
| -configfile <filename> | Optional. Specifies which PED Server configuration file to use. |
| -eadmin <0 or 1> | Optional. Specifies if the administration is on "localhost" or listening on the external host name. |
| -eserverport <0 or 1> | Optional. Specifies if the server port is on "localhost" or listening on the external host name. |
| -force | Optional parameter. Suppresses any prompts. |
| -idletimeout <int> | Optional. Specifies the idle connection timeout, in seconds. |
| -internalshutdowntimeout <int> | Optional. Specifies the shutdown timeout for internal services, in seconds. |
| -ip <server_IP> | Optional. Specifies the server listening IP address. When running pedserver -mode start on an IPv6 network, you must include this option. |
| -logerror <0 or 1> | Optional. Specifies if the logger should log "error" messages. Set to 0 for no, 1 for yes. |
| -logfilename <filename> | Optional. Specifies the log file name to which the logger should log messages. |
| -loginfo <0 or 1> | Optional. Specifies if the logger should log "info" messages. Set to 0 for no, 1 for yes. |
| -logtrace <0 or 1> | Optional. Specifies if the logger should log "trace" messages. Set to 0 for no, 1 for yes. |
| -logwarning <0 or 1> | Optional. Specifies if the logger should log "warning" messages. Set to 0 for no, 1 for yes. |
| -maxlogfilesize <size> | Optional. Specifies the maximum log file size in KB. |
| -name <registered appliance name> | |
| -pinginterval <int> | Optional. Specifies the time interval between pink commands, in seconds. |
| -pingtimeout <int> | Optional. Specifies timeout of the ping response, in seconds. |
| -port <server port> | Optional. Specifies the server port number. |
| -socketreadtimeout <int> | Optional. Specifies the socket read timeout, in seconds. |
| -socketwritetimeout <int> | Optional. Specifies socket write timeout, in seconds. |
Example
C:\Program Files\Safenet\LunaClient>pedServer –mode start -name hellohi -force >Ped Server launched in startup mode. >Starting background process >Background process started >Ped Server Process created, exiting this process.
