SERIAL_SetMode

Used to set the serial port communication parameters.

Synopsis

#include <serial.h> 
int SERIAL_SetMode( int port, 
		   int baud, 
		   int numBits, 
		   SERIAL_Parity parity,
		   int numStop, 
		   SERIAL_HSMode hs);

Parameters

port	Serial port number (0 based). Specify port 0 to redirect the output to the HSM trace log
baud	baud rate
numBits	Number of bits in a character. Should be 7 or 8
parity	One of the following: SERIAL_PARITY_NONE SERIAL_PARITY_ODD SERIAL_PARITY_EVEN SERIAL_PARITY_ONE SERIAL_PARITY_ZERO
numStop	Number of stop bits in a character. Should be 1 or 2
hs	Handshake type. Should be one of the following: SERIAL_HS_NONE * SERIAL_HS_RTSCTS SERIAL_HS_XON_XOFF NOTE   *Serial flow control is not implemented in the current HSM firmware. This value should be set to SERIAL_HS_NONE.

Return Code

Function Code	Qualification
0	Mode changed successfully.
-1	There was an error in operation.