Managing Your HA Groups

If you set up your HA groups as recommended, using auto-recovery, they require very little direct maintenance. You can perform the following tasks without pausing your applications:

>You can add or remove a member partition at any time (see Adding/Removing an HA Group Member).

>If you declined to use auto-recovery, you must manually recover group members whenever they fail (see Manually Recovering a Failed HA Group Member).

>If an HSM fails permanently, or is re-initialized, the member partition cannot be recovered (see Replacing an HA Group Member).

>If you want to delete an HA group, see Deleting an HA Group.

For other issues, see HA Troubleshooting.