stc rekeythreshold show
Display the rekey threshold for the symmetric key used to encrypt data on an STC link.The symmetric key is used the number of times specified by the threshold value, after which it is regenerated and the counter is reset to 0. Each command sent to the HSM over the STC link uses one life.
NOTE Secure Trusted Channel (STC) changes format for Luna 7.7.0 and newer.
Lunash commands used by the HSM SO for STC are described here for Luna 7.4.x and lower, and are discontinued for HSMs at 7.7.0 and later.
For Luna 7.7.0 and newer, only the Partition SO can configure these STC options with lunacm commands (see stcconfig ), after the partition is initialized.
You must be logged in as the HSM SO to use this command.
User Privileges
Users with the following privileges can perform this command:
>Admin
>Operator
>Monitor
Syntax
stc rekeythreshold show -partition <partition_name>
| Argument(s) | Shortcut | Description |
|---|---|---|
| -partition <partition_name> | -p | Specifies the name of the partition for which you want to display the STC rekey threshold. |
Example
lunash:>stc rekeythreshold show -partition partition2 Current rekey threshold for partition partition2 is 400 million messages. Command Result : 0 (Success)
