hsm envshow

Display environmental status information for the card. The following information is displayed:

>the card temperature.

>the card temperature warning threshold. If the card reaches this temperature, a warning is displayed in the output and logged.

>the status of the fans.

>the battery voltage.

>the battery voltage warning threshold. If the battery voltage falls below this level, a warning is displayed in the output and logged.

NOTE   The hsm commands appear only when LunaCM's active slot is set to the administrative partition.

Syntax

hsm envshow

Example

Normal conditions

lunacm:>hsm envshow

        Environmental:

                Fan 1 Status                            : standby

                Fan 2 Status                            : active

                Battery Voltage                         : 3.093 V

                Battery Warning Threshold Voltage       : 2.750 V

                System Temp                             : 35 deg. C

                System Temperature Warning Threshold    : 75 deg. C

Command Result : No Error

Temperature/voltage outside warning threshold

lunacm:> hsm envshow

        Environmental:

                Fan 1 Status                            : failed

                Fan 2 Status                            : active

                Battery Voltage                         : 2.615 V

                Battery Warning Threshold Voltage       : 2.750 V

WARNING: Battery Voltage below warning threshold!!

                System Temp                             : 77 deg. C

                System Temperature Warning Threshold    : 75 deg. C

WARNING: System Temperature above warning threshold!!

Command Result : No Error