hsm ped show
Display information for the current HSM PED connection.
User Privileges
Users with the following privileges can perform this command:
>Admin
>Operator
>Monitor
Syntax
hsm ped show
Example
lunash:>hsm ped show
Configured Remote PED Server IP address: 192.20.11.64
Configured Remote PED Server Port: 1503
Ped Client Version 2.0.1 (20001)
Ped Client launched in status mode.
Callback Server is running..
Callback Server Information:
Hostname: sa7ped
IP: 192.20.11.40
Software Version: 2.0.1 (20001)
Operating Information:
Admin Port: 1501
External Admin Interface: No
Callback Server Up Time: 494832 (secs)
Callback Server Current Idle Time: 3774 (secs)
Callback Server Total Idle Time: 494098 (secs) (99%)
Idle Timeout Value: 1800 (secs)
Number of PED ID Mappings: 1
PED ID Mapping Table:
PED ID: 4
Server Hostname: 192.20.11.64
Server Port: 1503
Status: Not Assigned
Number of HSMs: 1
HSM List:
Device Type: K7 HSM
HSM Serial Number: 532018
HSM Firmware Version: 7.0.1
HSM Cmd Protocol Version: 21
HSM Callback IO Version: 1
HSM Callback Protocol Version: 1
HSM Up Time: 423248 (secs)
HSM Total Idle Time: 422514 (secs) (99%)
HSM Current Idle Time: 3774 (secs)
Number of Connected PED Server : 0
Show command passed.
Command Result : 0 (Success)