Luna SNMP Trap Agent

Luna SNMP Trap Agent or lsta looks for significant events within the SafeNet Luna Network HSM appliance. When it sees a worthy event, lsta formats a trap notification and sends it to the configured user.

Facility Keyword

Software Process

Log File

local5

lsta

lunalogs

Expected Log Messages

The following log messages are normal and expected entries in the log files when lsta monitoring is enabled and started.

Agent Starting

2012 Feb 29 12:05:01 myLuna  local5 info  lsta: Starting Luna SNMP Trap Agent

This message indicates that lsta is starting. The agent does not run by default. Rather, an administrator must configure and start it from the Luna administrative shell.

Creating Named Pipe

2012 Feb 29 12:05:01 myLuna  local5 info  lsta: Created /home/admin/syslog.pipe as a named pipe

This message indicates that lsta created the necessary named pipe for interprocess communication with the syslog facility. This message results the first time lsta is started on a new SafeNet Luna Network HSM appliance.

Termination

2012 Feb 29 12:05:01 myLuna  local5 info  lsta: Luna SNMP Trap Agent terminated: Interrupted system call

This message indicates that lsta caught a SIGINT, SIGABRT or SIGTERM signal and terminated.

Unexpected Log Messages

Under normal circumstances, you should not see any of these log messages. If you do so, please contact Thales Technical Support to report the message and seek guidance on what to do next.

SNMP Data Logged

2012 Feb 29 12:05:01 myLuna  local5 info  lsta: fanAttentionNotify for [myLUT:192.168.0.58 / messages / 2012 Feb 29 12:05:00 / ipmievd / 1]

When trace level debugging is enabled, this message records the SNMP trap notification data sent by lsta. Trace level debugging is off in Luna SA so this message is unexpected.

Missing SNMP Parameters

2012 Feb 29 12:05:01 myLuna  local5 err  lsta: Error opening /usr/local/share/snmp/snmp.conf

This message indicates that the SNMP parameters needed by lsta are missing. A likely root cause is that an administrator has not yet set the parameters via the lunash:>sysconf snmp trap set command.

snmptrap Failed

2012 Feb 29 12:05:01 myLuna  local5 err  lsta: snmptrap failed: 256

This message indicates that lsta was unable to send a formatted trap notification to the intended user. A possible root cause is an out-of-date SAFENET-APPLIANCE-MIB on the appliance or a parameter defined by the lunash:>sysconf snmp trap set command in error (e.g., invalid IP address).

Interprocess Communication Failures

2012 Feb 29 12:05:01 myLuna  local5 err  lsta: Pipe file disappeared, stopping lsta
2012 Feb 29 12:05:01 myLuna  local5 err  lsta: Cannot read from pipe /home/admin/syslog.pipe: 5
2012 Feb 29 12:05:01 myLuna  local5 err  lsta: Will not overwrite /home/admin/syslog.pipe
2012 Feb 29 12:05:01 myLuna  local5 err  lsta: Cannot mknod /home/admin/syslog.pipe: 13

These messages indicate failure with the named pipe used for interprocess communication with the syslog facility. The first two messages represent failures during lsta operation; the last two on start up.

Unknown Sub-system

2012 Feb 29 12:05:01 myLuna  local5 err  lsta: Unknown/unsupported sub-system: xxx

This message indicates a programming error. lsta should have logic for all sub-systems defined in the SAFENET-APPLIANCE-MIB.

Log Record Parsing

2012 Feb 29 12:05:01 myLuna  local5 info  lsta: Could not parse log record: <log record>

This message indicates that lsta could not properly parse a log record for the fields expected. <log record> is the log message received by lsta from rsyslogd.

Could Not Close Parameters File

2012 Feb 29 12:05:01 myLuna  local5 err  lsta: Error closing /usr/local/share/snmp/snmp.conf

This message indicates that lsta could not properly close the SNMP parameters file.

Could Not Close Pipe

2012 Feb 29 12:05:01 myLuna  local5 err  lsta: Error closing /home/admin/syslog.pipe

This message indicates that lsta could not properly close the named pipe used by rsyslog to communicate log records.

chdir Failed

2012 Feb 29 12:05:01 myLuna  local5 err  lsta: Could not chdir

This message indicates that lsta could not properly change working directories.

umask Failed

2012 Feb 29 12:05:01 myLuna  local5 err  lsta: Could not umask

This message indicates that lsta could not properly determine the umask file settings.

Could Not Open stdin

2012 Feb 29 12:05:01 myLuna  local5 err  lsta: Error opening stdin

This message indicates that lsta could not properly open standard input.

Could Not Open stderr

2012 Feb 29 12:05:01 myLuna  local5 err  lsta: Error opening stderr

This message indicates that lsta could not properly open standard error.