hsm ped show

Display information for the current HSM PED connection.

User Privileges

Users with the following privileges can perform this command:

>Admin

>Operator

>Monitor

Syntax

hsm ped show

Example

lunash:>hsm ped show
 
Configured Remote PED Server IP address: 192.20.11.64
Configured Remote PED Server Port: 1503
 
Ped Client Version 2.0.1 (20001)
Ped Client launched in status mode.
Callback Server is running..
 
   Callback Server Information:
         Hostname:                        sa7ped
         IP:                              192.20.11.40
         Software Version:                2.0.1 (20001)
 
   Operating Information:
      Admin Port:                         1501
      External Admin Interface:           No
 
      Callback Server Up Time:                     494832 (secs)
      Callback Server Current Idle Time:           3774 (secs)
      Callback Server Total Idle Time:             494098 (secs) (99%)
      Idle Timeout Value:                 1800 (secs)
 
   Number of PED ID Mappings:            1
 
   PED ID Mapping Table:
      PED ID:                             4
      Server Hostname:                    192.20.11.64
      Server Port:                        1503
      Status: Not Assigned
 
 
   Number of HSMs:                        1
   HSM List:
      Device Type:                        K7 HSM
      HSM Serial Number:                  532018
      HSM Firmware Version:               7.0.1
      HSM Cmd Protocol Version:           21
      HSM Callback IO Version:            1
      HSM Callback Protocol Version:      1
      HSM Up Time:                        423248 (secs)
      HSM Total Idle Time:                422514 (secs) (99%)
      HSM Current Idle Time:              3774 (secs)
 
   Number of Connected PED Server :      0
 
Show command passed.
 
Command Result : 0 (Success)