syslog remotehost add

Home >	LunaSH Command Reference Guide > LunaSH Commands > syslog > syslog remotehost add

Add a remote host receiving the logs. Can be any system that provides the remote syslog service.

Note: For this function to work you must open receiving udp port 514 on the remote log server.

Users with the following privileges can perform this command:

•Admin

•Operator

syslog remotehost add -host <hostname_or_IP_address> [-protocol <protocol>] [-port <port>]

Option	Shortcut	Description
-host <hostname_or_IP_address>	-h	Specifies the hostname or the IP address of the remote computer system that will be accepting and storing the syslogs.
-protocol <protocol>	-pr	Specifies the network protocol. Valid values: tcp,udp
-port <port>	-po	Remote Logging Server port number. Range: 0-65535

Option

Shortcut

Description

-host <hostname_or_IP_address>

-h

Specifies the hostname or the IP address of the remote computer system that will be accepting and storing the syslogs.

-protocol <protocol>

-pr

Specifies the network protocol.

Valid values: tcp,udp

-port <port>

-po

Remote Logging Server port number.

Range: 0-65535

lunash:>syslog remotehost add -host 192.12.1.123

Stopping syslog:                                           [  OK  ]

Starting syslog:                                           [  OK  ]

iptables: Saving firewall rules to /etc/sysconfig/iptables:[  OK  ]

192.12.1.123 added successfully

Make sure the rsyslog service on 192.12.1.123 is properly configured to receive the logs

Command Result : 0 (Success)