hsm ped show

Home >	LunaSH Command Reference Guide > LunaSH Commands > hsm > hsm ped show

Display information for the current HSM PED connection.

Users with the following privileges can perform this command:

•Admin

•Operator

•Monitor

hsm ped show

lunash:>hsm ped show

Configured Remote PED Server IP address: 192.20.11.64

Configured Remote PED Server Port: 1503

Ped Client Version 2.0.1 (20001)

Ped Client launched in status mode.

Callback Server is running..

   Callback Server Information:

         Hostname:                        sa7ped

         IP:                              192.20.11.40

         Software Version:                2.0.1 (20001)

   Operating Information:

      Admin Port:                         1501

      External Admin Interface:           No

      Callback Server Up Time:                     494832 (secs)

      Callback Server Current Idle Time:           3774 (secs)

      Callback Server Total Idle Time:             494098 (secs) (99%)

      Idle Timeout Value:                 1800 (secs)

   Number of PED ID Mappings:            1

   PED ID Mapping Table:

      PED ID:                             4

      Server Hostname:                    192.20.11.64

      Server Port:                        1503

      Status: Not Assigned

   Number of HSMs:                        1

   HSM List:

      Device Type:                        K7 HSM

      HSM Serial Number:                  532018

      HSM Firmware Version:               7.0.1

      HSM Cmd Protocol Version:           21

      HSM Callback IO Version:            1

      HSM Callback Protocol Version:      1

      HSM Up Time:                        423248 (secs)

      HSM Total Idle Time:                422514 (secs) (99%)

      HSM Current Idle Time:              3774 (secs)

   Number of Connected PED Server :      0

Show command passed.

Command Result : 0 (Success)