|
Home > |
|---|
List the HMAC message digest algorithms you can use for message integrity verification on an STC link.
This command is available only if the current slot is a PPSO partition.
stcconfig hmac show [-slot <slot_id>]
| Parameter | Shortcut | Description |
|---|---|---|
| -slot <slot_id> | -s <slot_id> |
Specifies the slot containing the partition whose available HMAC algorithms you want to display. This parameter is available only if you are logged into the HSM's Admin partition. |
lunacm:> stcc hsh
This table lists the HMAC algorithms supported for STC links to the current slot.
Enabled algorithms are accepted during STC link negotiation with a client.
At least one HMAC algorithm must be enabled.
HMAC ID HMAC Name Enabled
__________________________________________________________________
0 HMAC with SHA 256 Bit Yes
1 HMAC with SHA 512 Bit Yes
lunacm:> stcc hsh -s 2
This table lists the HMAC algorithms supported for STC links to the current slot.
Enabled algorithms are accepted during STC link negotiation with a client.
At least one HMAC algorithm must be enabled.
HMAC ID HMAC Name Enabled
__________________________________________________________________
0 HMAC with SHA 256 Bit Yes
1 HMAC with SHA 512 Bit Yes