|
Home > |
|---|
Change the challenge secret or password for the indicated PKI device.
An external SafeNet HSM can be USB-connected to a SafeNet Network HSM appliance for:
•local backup/restore operations (SafeNet Backup HSM)
•PKI bundle operations (SafeNet USB HSM)
SafeNet Network HSM does not pass PED operations and data through to an externally connected SafeNet HSM from a SafeNet PED that is connected locally to the SafeNet Network HSM.
If the external HSM is PED-authenticated, then the options for SafeNet PED connection are:
•local PED connection, directly to the affected HSM, when needed, or
•Remote PED connection, passed through the SafeNet Network HSM
Note: Support for PKI Bundles with Remote PED begins at firmware version 6.10.1 in the external HSM.
Note: Support for locally connected Backup HSM with Remote PED,
begins at firmware version 6.10.1 in the external HSM.
Note: Use of Remote PED with an external device is made possible when you set up with the commands
hsm ped vector init -serial <serial#_of_external_HSM>
and
hsm ped connect -serial <serial#_of_external_HSM>
before using token pki or token backup commands.
token pki changePin -serial <tokenserialnumber> [-force]
| Parameter | Shortcut | Description |
|---|---|---|
| -force | -f | Force the action with no prompting. |
| -serial | -s | Specifies the serial number of the inserted token, whose password or challenge is to change. Use the token pki list command to get the token serial number. |
lunash:> token pki changepin -serial 1766711
Please type "proceed" to continue, anything else to abort: proceed
**********************************************
* *
* About to change the user password *
* Please pay attention to the PED *
* *
**********************************************
Please enter the current user challenge:
The partition has not been activated yet.
Luna PED operation required to activate partition on HSM - use User or
Partition Owner (black) PED key.
Please enter the new user challenge:
Please re-enter the new user challenge:
Success changing the user password for slot 4 !
Command Result : 0 (Success)