|
Home > |
|---|
Add an NTP server. NTP will automatically synchronize with the highest-stratum server you add. If none of these servers are accessible, NTP will synchronize with the local clock, and may be subject to drift.
A DNS name server must be configured if you add an NTP server by hostname.
Users with the following privileges can perform this command:
•Admin
•Operator
sysconf ntp addserver <hostname_or_ipaddress> [-autokey | -key <keyid>] [-burst] [-iburst] [-prefer] [-version <version>]
| Parameter | Shortcut | Description |
|---|---|---|
| <hostname_or_ipaddress> | Specifies the hostname or IP address of the NTP Server. | |
| -autokey | -a | Send and receive packets authenticated by the AutoKey scheme (not used with -key <keyid>). |
| -burst | -b | Send multiple packets when the server is reachable. |
| -iburst | -i | Send out bursts of 8 packets when the server is unreachable. |
| -key | -k |
Specifies the NTP Authentication key ID (not used with AutoKey) Range: 1 to 65535 |
| -prefer | -p | Set this server as the preferred server. |
| -version <version> | -v |
Specifies the NTP version Valid values: 3 or 4 |
lunash:> sysconf ntp addserver time.nrc.ca
NTP server 'server time.nrc.ca' added.
WARNING !! Server 'time.nrc.ca' added without authentication.
NTP is enabled
Shutting down ntpd: [ OK ]
Starting ntpd: [ OK ]
Please wait to see the result ......
NTP is running
===========================================================
NTP Associations Status:
ind assid status conf reach auth condition last_event cnt
===========================================================
1 56579 8011 yes no none reject mobilize 1
2 56580 8011 yes no none reject mobilize 1
===========================================================
Please look at the ntp log to see any potential problem.
Command Result : 0 (Success)