|
Home > |
|---|
Displays the fan speed, temperature and voltage of the motherboard and power supply units.
Depending upon when you purchased your SafeNet Network HSM appliance, the baseboard management controller firmware may be at a revision that reports more data on the power supply units than earlier BMC versions. The first example below shows the output from an earlier version of the BMC firmware. The second example shows the output from a more recent version. In this second example, the right PSU (facing the front of SafeNet Network HSM) has no A/C power connected to it (it is in an audible alarm state).
status sensors [-log]
| Option | Shortcut | Description |
|---|---|---|
| -log | -l | Show sensors event logs. |
lunash:>status sensors This command displays the fan speed, temperature and voltage of the motherboard and power supply units. Sensor | Reading | Unit |status | Thresholds -------------------------------------------------------------------------------------------- FAN1A | 4400.000 | RPM | ok | 1000.000 | 2000.000 | na | na FAN1B | 6200.000 | RPM | ok | 1000.000 | 2000.000 | na | na FAN2A | 4400.000 | RPM | ok | 1000.000 | 2000.000 | na | na FAN2B | 6000.000 | RPM | ok | 1000.000 | 2000.000 | na | na FAN3A | 4300.000 | RPM | ok | 1000.000 | 2000.000 | na | na FAN3B | 6400.000 | RPM | ok | 1000.000 | 2000.000 | na | na CPU | 14.000 | degrees C | ok | na | na | 87.000 | 92.000 VRD | 27.000 | degrees C | ok | na | na | 90.000 | 100.000 PCH | 51.000 | degrees C | ok | na | na | 90.000 | 100.000 MEM | 51.000 | degrees C | ok | na | na | na | 105.000 Inlet | 18.000 | degrees C | ok | na | na | 40.000 | 50.000 CHA DIMM 0 | 31.000 | degrees C | ok | na | na | 87.000 | 97.000 CHA DIMM 1 | na | degrees C | na | na | na | 87.000 | 97.000 CHA DIMM 2 | na | degrees C | na | na | na | 87.000 | 97.000 CHB DIMM 0 | 32.000 | degrees C | ok | na | na | 87.000 | 97.000 CHB DIMM 1 | na | degrees C | na | na | na | 87.000 | 97.000 CHB DIMM 2 | na | degrees C | na | na | na | 87.000 | 97.000 RAM TMax | 32.000 | degrees C | ok | na | na | 87.000 | 97.000 InletM | 28.000 | degrees C | ok | na | na | na | 105.000 CPU_VCORE | 0.968 | Volts | ok | na | 0.632 | 1.440 | na VBAT | 2.924 | Volts | ok | na | 2.796 | na | na 3VSB | 3.364 | Volts | ok | na | 3.092 | 3.492 | na 3VMain | 3.364 | Volts | ok | na | 3.092 | 3.492 | na +5V | 5.100 | Volts | ok | na | 4.692 | 5.304 | na +12V | 11.960 | Volts | ok | na | 11.284 | 12.740 | na PSU1_Voltage | 0x0 | discrete | 0x0200| na | na | na | na PSU1_Temp | 0x0 | discrete | 0x0200| na | na | na | na PSU1_Fan | 0x0 | discrete | 0x0200| na | na | na | na PSU2_Voltage | na | discrete | na | na | na | na | na PSU2_Temp | na | discrete | na | na | na | na | na PSU2_Fan | na | discrete | na | na | na | na | na CPU_Thermtrip | 0x0 | discrete | NR | na | na | na | na PSU1_Present | 0x0 | discrete | 0x0200| na | na | na | na PSU2_Present | 0x0 | discrete | ok | na | na | na | na Notes: NR: Not Reading (Error) CR: Critical 0.00 RPM means fan unplugged, failed, or sensors not readable DIMM: Dual In-Line Memory Module PSU1: Power Supply Unit 1 PSU2: Power Supply Unit 2 Fan1, Fan2 and Fan3 are pluggable modules on the front of the appliance. Each fan unit contains two fans: A and B. ----------- Power Supplies Status -------------- PSU1_Voltage | Failure detected PSU1_Temp | Failure detected PSU1_Fan | Failure detected PSU2_Voltage | No Reading PSU2_Temp | No Reading PSU2_Fan | No Reading CPU_Thermtrip | OK PSU1_Present | Failure detected PSU2_Present | Presence detected ----------- Front Cooling Fans Status -------------- FAN1A | OK | 4400 RPM FAN1B | OK | 6200 RPM FAN2A | OK | 4400 RPM FAN2B | OK | 6000 RPM FAN3A | OK | 4300 RPM FAN3B | OK | 6400 RPM -------------- chassis status ----------------- System Power : on Power Overload : false Power Interlock : inactive Main Power Fault : false Power Control Fault : false Power Restore Policy : previous Last Power Event : ac-failed Chassis Intrusion : inactive Front-Panel Lockout : inactive Drive Fault : false Cooling/Fan Fault : false Front Panel Control : none Command Result : 0 (Success)