hsm ped show

Home >	LunaSH Command Reference Guide > LunaSH Commands > hsm > hsm ped show
hsm ped show

Display information for the current HSM PED connection.
Syntax

hsm ped show
Example

lunash:>hsm ped show

Configured Remote PED Server IP address: 192.20.10.166
Configured Remote PED Server Port: 1503

Ped Client Version 2.0.1 (20001)
Ped Client launched in status mode.
Callback Server is running..

   Callback Server Information:
         Hostname:                        SA172201912
         IP:                              192.20.19.12 /192.168.1.12
         Software Version:                2.0.1 (20001)

   Operating Information:
      Admin Port:                         1501
      External Admin Interface:           No

      Callback Server Up Time:                     73939 (secs)
      Callback Server Current Idle Time:           2530 (secs)
      Callback Server Total Idle Time:             73488 (secs) (99%)
      Idle Timeout Value:                 1800 (secs)

   Number of PED ID Mappings:            0

   Number of HSMs:                        1
   HSM List:
      Device Type:                        PCI HSM
      HSM Serial Number:                  478980
      HSM Firmware Version:               6.10.9
      HSM Cmd Protocol Version:           17
      HSM Callback IO Version:            1
      HSM Callback Protocol Version:      1
      HSM Up Time:                        73938 (secs)
      HSM Total Idle Time:                73487 (secs) (99%)
      HSM Current Idle Time:              2530 (secs)

   Number of Connected PED Server :      2

   Connected PED Server Table:
      Server Hostname:                    new-11-36
      Server Port:                        3987
      Status: Not Assigned
      Server Information:
         Hostname:                        new-11-36
         IP:                              192.20.19.12
         Firmware Version:                2.4.0-3
         PedII Protocol Version:          1.0.1-0
         Software Version:                1.0.7 (10007)
         Ped2 Connection Status:          Connected
         Ped2 RPK Count                   0
         Ped2 RPK Serial Numbers          (none)

      Server Hostname:                    WIN-1TFMAA8U4V7
      Server Port:                        61773
      Status: Not Assigned
      Server Information:
         Hostname:                        WIN-1TFMAA8U4V7
         IP:                              192.20.19.12
         Firmware Version:                2.7.0-3
         PedII Protocol Version:          1.0.1-0
         Software Version:                1.0.7 (10007)
         Ped2 Connection Status:          Connected
         Ped2 RPK Count                   0
         Ped2 RPK Serial Numbers          (none)

Show command passed.

Command Result : 0 (Success)