Home >

LunaCM Command Reference Guide > LunaCM Commands > partition > partition archive list

partition archive list

Display a list of the backup partitions on a backup device in a specified slot.

Note:  If you want to use this command to list the partition on an SFF token, you must be logged into a partition that has the SFF capability enabled. You can be logged into any SFF-enabled partition – it is not necessary to log into the partition the backup was made against.

Syntax

partition archive list -slot <slot>

Parameter Shortcut Description
-commandtimeout -ct The command timeout for network communication. The default timeout is 10 seconds. The maximum timeout is 3600. This option can be used to adjust the timeout value to account for network latency. (optional)
-debug -de Turn on additional error information. (optional)
-hostname -ho Host name of remote workstation running remote backup server. (required when -s remote is used)
-port -po Port number for remote backup server on remote workstation. (required when -s remote is used)
-slot -s

Target slot containing the backup device. It can be specified by any of the following:

<slot number>, if the backup slot is in the current system.

remote -hostname <host name> -port <port number> if the backup device is in a remote work station.

direct to specify a USB attached backup device. If you know the slot number that contains the USB attached HSM, you can specify that slot number explicitly (for example, -s 5)

etoken to specify a SFF backup (eToken 7300) inserted into a SafeNet PED connected to the local HSM or connected by USB to a host computer running PedServer.

Example

lunacm:>partition archive list -slot eToken              

Command Result : No Error