|
Home > |
|---|
Enable the use of an HMAC message digest algorithm for message integrity verification on an STC link. The HMAC algorithm that is both enabled and that offers the highest level of security is used. For example, if SHA 256 and SHA 512 are enabled, SHA 512 is used. You can use the command "stc hmac show" to show which HMAC message digest algorithms are currently enabled/disabled.
Note: All STC links use message integrity verification, so at least one HMAC algorithm must be enabled.
You must be logged in as the HSM SO to use this command.
stc hmac enable -partition <partition_name> -id <hmac_id>
| Parameter | Shortcut | Description |
|---|---|---|
| -partition <partition_name> |
-p <partition_name> |
Specifies the partition for which you want to enable the HMAC algorithm. |
| -id <hmac_id> | -id <hmac_id> | Specifies the numerical identifier of the HMAC algorithm you want to enable, as listed using the command "stc hmac show". |
lunash:> stc hmac show -par mapleleafs
HMAC ID Name Enabled
0 HMAC with SHA 256 Bit No
1 HMAC with SHA 512 Bit Yes
Command Result : 0 (Success)
lunash:> stc hmac enable -par mapleleafs -id 0
Command Result : 0 (Success)
HMAC with SHA 256 Bit is now enabled for partition mapleleafs.
lunash:> stc hmac show -par mapleleafs
HMAC ID HMAC Name Enabled
0 HMAC with SHA 256 Bit Yes
1 HMAC with SHA 512 Bit Yes
Command Result : 0 (Success)