|
Home > |
|---|
This section describes how to mount the Luna G5 and connect the cables and peripheral devices.
1.If you are using the SafeNet Luna G5 rack-mount shelf, mount the shelf in a suitable equipment rack. Use fasteners appropriate to your brand of equipment rack. The shelf and the Luna G5 units are light-weight and therefore are adequately secured at the front only. Do not mount more than two Luna G5 devices, or any non-Luna G5 equipment, on the shelf.
2.Place your Luna G5 unit(s) on the shelf and push back until one of the index posts at the back edge of the shelf engages the index hole on the back panel of each Luna G5.
3.Insert the power (a) and USB (b) cables at the rear panel.
4.If you are installing a PED-authenticated Luna G5, connect the PED at the front panel, using the provided local PED cable.
5.Using the USB cable, connect the Luna G5 to a USB port on the Luna client computer.
