Home >

Configure PPSO Application Partitions

This chapter describes how the partition owner (partition SO) configures a PPSO partition after receiving it from the HSM SO. The configuration tasks you need to perform depend on whether the partition is password-authenticated or PED-authenticated as follows:

Authentication	Tasks
Password	1."Initialize the Partition SO and Crypto Officer Roles on a PW-Auth PPSO Partition" 2."Initialize the Crypto User Role on a PW-Auth PPSO Partition "
PED	1."Initialize the Partition SO and Crypto Officer Roles on a PED-Auth PPSO Partition" 2."Initialize the Crypto User Role on a PED-Auth PPSO Partition " 3."Activate a PED-Auth PPSO Partition for the Crypto Officer Role" or "Activate a PED-Auth PPSO Partition for the Crypto User Role"

Authentication

Tasks

Password

1."Initialize the Partition SO and Crypto Officer Roles on a PW-Auth PPSO Partition"

2."Initialize the Crypto User Role on a PW-Auth PPSO Partition "

PED

1."Initialize the Partition SO and Crypto Officer Roles on a PED-Auth PPSO Partition"

2."Initialize the Crypto User Role on a PED-Auth PPSO Partition "

3."Activate a PED-Auth PPSO Partition for the Crypto Officer Role" or "Activate a PED-Auth PPSO Partition for the Crypto User Role"

Open topic with navigation