|
Home > |
|---|
Reset the Luna HSM. Use this command to reset the Luna HSM if it has has stopped responding, but your computer is still responsive. This command closes out any login status and open sessions.
If you are a developer, trace what you were doing at the time the problem occurred and try to find another way to program the task that does not put the module in an unresponsive state. If that is not possible, then contact SafeNet Support with details of the problem and how to reproduce it.
If you are an end-user customer, using an application developed by a supplier other than SafeNet, contact that company for a resolution of the problem. They know how their application is programmed to accomplish tasks that use the Luna HSM, and they can determine possible workarounds or fixes. If the third-party supplier determines that there is an actual implementation fault with the Luna, they will contact SafeNet after gathering the relevant information.
Note: The lunacm hsm commands appear only when the current slot selected in lunacm is for a locally-installed HSM, such as a Luna PCI-E. When lunacm is directed at a slot corresponding to a remote Luna SA, the hsm-level commands do not appear, since lunacm has a client-only connection to a remote HSM and therefore cannot log in as SO to a remote HSM. To access HSM commands on the Luna SA appliance, you must use the Luna Shell (lunash).
hsm reset
lunacm:> hsm reset
Command Result : No Error