lunash status Commands
NAME
status disk - Get hard disk SMART information
SYNOPSIS
lunash:> status disk
DESCRIPTION
Display the current disk usage information from SMART monitoring service.
OPTIONS
No subcommands or options are available.
SAMPLE OUTPUT
[myLuna] lunash:>status disk
===================== Hard Disk utilization =====================
| Filesystem | 1K-blocks | Used | Available | Use% | Mounted on |
|---|---|---|---|---|---|
| /dev/sda5 | 988212 | 124028 | 813984 | 14% | / |
| /dev/sda7 | 1976492 | 35784 | 1840304 | 2% | /tmp |
| /dev/sda9 | 3945128 | 96496 | 3648224 | 3% | /var |
| /dev/sda10 | 1976492 | 35764 | 1840324 | 2% | /var/tmp |
| /dev/sda11 | 1976492 | 40712 | 1835376 | 3% | /var/log |
| /dev/sda12 | 29538432 | 176576 | 27861388 | 1% | /home |
| /dev/sda8 | 39381744 | 594544 | 36786708 | 2% | /usr |
| /dev/sda6 | 101086 | 14220 | 81647 | 15% | /boot |
===================== Hard Disk SMART Report =====================
=== START OF INFORMATION SECTION ===
Device Model: WDC WD1600BEVT-00A23T0
Serial Number: WD-WX91A10N4146
Firmware Version: 04.04V06
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
| ID# | ATTRIBUTE_NAME | FLAG | VALUE | WORST | THRESH | TYPE | UPDATED | WHEN_FAILED | RAW_VALUE |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Raw_Read_Error_Rate | 124028 | 200 | 200 | 051 | Pre-fail | Always | - | 0 |
| 3 | Spin_Up_Time | 35784 | 201 | 200 | 021 | Pre-fail | Always | - | 2933 |
| 4 | Start_Stop_Count | 96496 | 100 | 100 | 000 | Old_Age | Always | - | 24 |
| 5 | Reallocated_Sector_Ct | 35764 | 200 | 200 | 140 | Pre-fail | Always | - | 0 |
| 7 | Seek_Error_Rate | 40712 | 200 | 200 | 000 | Old_Age | Always | - | 0 |
| 9 | Power_On_Hours | 176576 | 100 | 100 | 000 | Old_Age | Always | - | 101 |
| 10 | Spin_Retry_Count | 594544 | 100 | 253 | 000 | Old_Age | Always | - | 0 |
| 11 | Calibration_Retry_Count | 0x0012 | 100 | 253 | 000 | Old_Age | Always | - | 0 |
| 12 | Power_Cycle_Count | 0x0032 | 100 | 100 | 000 | Old_Age | Always | - | 24 |
| 192 | Power-Off_Retract_Count | 0x0032 | 200 | 200 | 000 | Old_Age | Always | - | 4 |
| 193 | Load_Cycle_Count | 0x0032 | 200 | 200 | 000 | Old_Age | Always | - | 385693 |
| 194 | Temperature_Celsius | 0x0022 | 117 | 093 | 000 | Old_Age | Always | - | 30 |
| 196 | Reallocated_Event_Count | 0x0032 | 200 | 200 | 000 | Old_Age | Always | - | 0 |
| 197 | Current_Pending_Sector | 0x0012 | 200 | 200 | 000 | Old_Age | Always | - | 0 |
| 198 | Offline_Uncorrectable | 0x0010 | 100 | 253 | 000 | Old_Age | Offline | - | 0 |
| 199 | UDMA_CRC_Error_count | 0x0032 | 200 | 200 | 000 | Old_age | Always | - | 0 |
| 200 | Multi_Zone_Error_Rate | 0x00008 | 100 | 253 | 000 | Old_Age | Ofline | - | 0 |
SMART Error Log Version: 1
No Errors Logged
Command Result : 0 (Success)
lunash:>