Path to the Chrystoki2 library on Windows operating systems.

Default: C:\Program Files\SafeNet\LunaClient\cryptoki.dll

Path to the Chrystoki2 library on 32-bit Windows systems only.

Default: C:\Program Files\SafeNet\LunaClient\win32\libCryptoki2.dll

NOTE   Luna HSM Client 10.1 and newer includes libraries for 64-bit operating systems only.

Path to the Chrystoki2 library on 64-bit Linux/UNIX operating systems.

Default:

>Linux/AIX: /usr/safenet/lunaclient/libs/64/libCryptoki2_64.so

>Solaris: /opt/safenet/lunaclient/libs/64/libCryptoki2_64.so

The amount of time (in milliseconds) the library allows for the HSM to respond to a cloning command.

Default: 300000

This is an exception to DefaultTimeout (below). It defines the time (in milliseconds) allowed for all PED-related HSM commands. PED-related commands can take longer than ordinary commands governed by DefaultTimeOut.

Generally, the following formula applies:

CommandTimeOutPedSet = DefaultTimeOut + PEDTimeout1 + PEDTimeout2 + PEDTimeout3

Default: 720000

Defines the time (in milliseconds) the HSM driver in the host system waits for HSM commands to return a result. If a result is not returned in that time, the driver halts the HSM and returns DEVICE_ERROR to all applications using the HSM. The only exceptions are when a command's timeout is hard-coded in the Cryptoki library, or the command falls into a class governed by one of the other timeout intervals described elsewhere in this section.

Default: 500000

Timeout (in milliseconds) for Domain Parameter Generation.

Default: 5400000

Defines the time (in milliseconds) the library waits for a keypair generation operation to return a value. The randomization component of keypair generation can cause large keypairs to take a long time to generate, and this setting keeps the attempts within a reasonable time. You can change this value to manage your preferred balance between long waits and the inconvenience of restarting a keygen operation.

Default: 2700000

Defines the time (in milliseconds) the HSM attempts to ping the PED before sending a PED operation request. If the PED is unreachable, the HSM returns a code indicating that the PED is not connected.

Default: 100000

Defines the time (in milliseconds) that the HSM waits for the local PED to respond to a PED operation request. If the local PED does not respond to the request within the span of PEDTimeout2, the HSM returns an appropriate result code (such as PED_TIMEOUT). This is the timeout you might increase from the Default value if you were initializing larger MofN PED Key sets - the HSM allows M and N to each be up to 16 splits - maybe applying PED PINS, and making a duplicate set as well.

Default: 200000

Defines the additional time (in milliseconds) the HSM waits for a remote PED to respond to a PED operation request. Therefore, the actual time the firmware waits for a remote PED response is PEDTimeout2 + PEDTimeout3.

Default: 20000

Number of SafeNet Luna G5 Backup HSM slots reserved so that the library will check for connected devices.

Valid Values:

>0: If you have no SafeNet Luna G5 Backup HSMs and wish to eliminate the reserved spaces in your slot list, use this setting.

>1-N: Can be set to any number, but is effectively limited by the number of external USB devices supported by your client workstation.

Default: 3

Number of SafeNet Luna G7 Backup HSM slots reserved so that the library will check for connected devices.

Valid Values:

>0: If you have no SafeNet Luna G7 Backup HSMs and wish to eliminate the reserved spaces in your slot list, use this setting.

>1-N: Can be set to any number, but is effectively limited by the number of external USB devices supported by your client workstation.

Default: 3

This setting was used when debugging older SafeNet products. For modern products it is ignored.

Valid Values:

>0: false

>1 (default): true

The location of the RBS library.

Default:

>Windows: C:\Program Files\SafeNet\LunaClient\rbs_processor2.dll

>Linux/AIX: /usr/safenet/lunaclient/rbs/lib/librbs_processor2.dll

>Solaris: /opt/safenet/lunaclient/rbs/lib/librbs_processor2.dll

The port number used by the RBS server.

Valid Values: any unassigned port

Default: 1792

The location of the RBS Client authentication file.

Default:

>Windows: C:\Program Files\SafeNet\LunaClient\config\clientauth.dat

>Linux/AIX: /usr/safenet/lunaclient/rbs/clientauth.dat

>Solaris: /opt/safenet/lunaclient/rbs/clientauth.dat

The location of the OpenSSL configuration file used by RBS Server or Client.

Default:

>Windows: C:\Program Files\SafeNet\LunaClient\rbs\server.cnf

>Linux/AIX: /usr/safenet/lunaclient/rbs/server/server.cnf

>Solaris: /opt/safenet/lunaclient/rbs/server/server.cnf

The location of the RBS Server certificate private key file.

Default:

>Windows: C:\Program Files\SafeNet\LunaClient\cert\server\serverkey.pem

>Linux/AIX: /usr/safenet/lunaclient/rbs/server/serverkey.pem

>Solaris: /opt/safenet/lunaclient/rbs/server/serverkey.pem

The location of the RBS Server certificate file.

Default:

>Windows: C:\Program Files\SafeNet\LunaClient\cert\server\server.pem

>Linux/AIX: /usr/safenet/lunaclient/rbs/server/server.pem

>Solaris: /opt/safenet/lunaclient/rbs/server/server.pem

Determines whether RBS acts as a server or client.

Valid Values:

>0: Client

>1 (default): Server

The hostname or IP address that the RBS server will listen on.

Valid Value: any hostname or IP address

Default: 0.0.0.0 (any IP on the local host)

Time in milliseconds before a receive timeout.

Default: 20000

Location of the OpenSSL configuration file.

Default:

>Windows: C:\Program Files\SafeNet\LunaClient\openssl.cnf

>Linux/AIX: /usr/safenet/lunaclient/bin/openssl.cnf

>Solaris: /opt/safenet/lunaclient/bin/openssl.cnf

Location of the client private key. This value is set by vtl or lunacm:> clientconfig deploy.

Default:

>Windows: C:\Program Files\SafeNet\LunaClient\cert\client\<ClientName>Key.pem

>Linux/AIX: /usr/safenet/lunaclient/cert/client/<ClientName>Key.pem

>Solaris: /opt/safenet/lunaclient/cert/client/<ClientName>Key.pem

Location of the client certificate that is uploaded to SafeNet Luna Network HSM for NTLS. This value is set by vtl or lunacm:> clientconfig deploy.

Default:

>Windows: C:\Program Files\SafeNet\LunaClient\cert\client\<ClientName>Cert.pem

>Linux/AIX: /usr/safenet/lunaclient/cert/client/<ClientName>Cert.pem

>Solaris: /opt/safenet/lunaclient/cert/client/<ClientName>Cert.pem

Location of the server certificate file on the client workstation. This value is set by vtl or lunacm:> clientconfig deploy.

Default:

>Windows: C:\Program Files\SafeNet\LunaClient\cert\server\CAFile.pem

>Linux/AIX: /usr/safenet/lunaclient/cert/server/CAFile.pem

>Solaris: /opt/safenet/lunaclient/cert/server/CAFile.pem

Determines whether the library searches for network slots.

Valid Values:

>0: The library does not search for network slots.

>1 (default): The library searches for network slots.

TCPKeepAlive is a TCP stack option, available at the Luna HSM Client and the SafeNet Luna Network HSM appliance. It is controlled via an entry in the Luna HSM Client configuration file, and an equivalent file on the SafeNet Luna Network HSM.

The settings at the appliance and the client are independent. This allows a level of assurance, in case (for example) a firewall setting blocks communication in one direction.

Valid Values:

>0: false

>1 (default): true

These entries identify NTLS-linked SafeNet Luna Network HSM servers/ports, and determines the order in which they are polled to create a slot list. These values are set by vtl or lunacm:> clientconfig deploy.

Determines whether slot listing begins at 0 or 1.

Default: 0

Determines whether the Admin partitions of locally-installed SafeNet Luna PCIe HSMs are visible in the slot list.

Valid Values:

>no: Admin slots are hidden.

>yes (default): Admin slots are visible.

Determines whether slot numbers are reserved for partitions that have not yet been created on the HSM. When this setting is enabled, slot numbers remain consistent over time, even when new partitions are created.

Valid Values:

>no (default): Only existing partitions are assigned slot numbers.

>yes: Slot numbers are reserved for the maximum number of partitions that can be created on HSMs connected to the client.

NOTE   This does not apply to SafeNet Luna Network HSM partitions assigned to the client, which will always appear in the lowest-numbered slots, causing locally-connected and DPoD slots to increment higher.

Allows you to set permanent slot numbers for specific partitions or HA virtual partitions. If you use this setting, you must specify a slot for all partitions on a specific HSM, or the partitions not listed here will not be visible to the client.

Valid Values: Comma-delimited list in the format <slotnum>(<serialnum>)

Example:

ShowUserSlots=1(351970018022),2(351970018021),3(351970018020),...

Specifies the interval (in seconds) at which the library will attempt to reconnect with a missing HA member, until the set number of attempts is reached. This value is set using lunacm:> hagroup interval.

Valid Values:

>60-1200: Wait the specified number of seconds between reconnection attempts.

Default: 60 seconds

Determines whether individual HA member slots are visible to client applications. Hiding individual members helps prevent synchronization errors by preventing applications from directing calls to individual member partitions. If a member partition fails, the other slots in the system change, which can cause applications to send calls to the wrong slot number. This setting prevents this by hiding all physical slots from applications.

Valid Values:

>0 (default): All partitions are visible to applications as slots.

>1: Only HA virtual slots are visible to applications.

NOTE   This setting does not affect how slots are numbered in LunaCM; you can still configure individual member partitions with HAOnly mode enabled.

Specifies the number of reconnection attempts the client makes to a missing HA member. Once this number is reached, you must manually reconnect the member when it becomes available (see Manually Recovering a Failed HA Group Member).

This value is set using lunacm:> hagroup retry.

Valid Values:

>-1: Perform infinite reconnection attempts.

>0: Disable HA auto-recovery.

>1-500: Perform the specified number of reconnection attempts.

Controls whether the public exponent of an RSA key can be copied from the private key template, if the public key template does not already have a public exponent attribute set.

Valid Values:

>0: if no public exponent is provided in the public template, an error is returned (expected behavior).

>1(default): if no public exponent is provided in the public template, the private exponent is copied from the private template to populate the public template.

For PKCS#11 compliance, this should be set to 0.

NOTE   This functionality requires Luna HSM Client 7.1.0 or newer.

Determines what action to take if a function binding fails during a CryptokiConnect() operation.

Valid Values:

>0 (default): fail if not all functions can be resolved

>1: do not fail but issue warning for each function not resolved

>2: do not fail and do not issue warning (silent mode)

Determines whether the client can log in to a partition on an HSM that uses Functionality Modules (FMs). FMs consist of custom-designed code that introduces new functionality, which can be more or less secure than standard HSM functions.

Possible values include:

>0: the client does not allow login to an FM-enabled partition

>1: the client allows login to an FM-enabled partition

This entry is added to the configuration file the first time you initialize or log in to an FM-enabled partition using LunaCM. You are prompted to confirm that you want to allow login.

Enables the SafeXcel 1746 security co-processor on Luna 6 HSMs, which is used to offload packet processing and cryptographic computations from the host processor. Does not apply to Luna 7 HSMs or HSM on Demand services..

Valid Values:

>0: SafeXcel co-processor is disabled on Luna 6 HSMs.

>1 (default): SafeXcel co-processor is enabled on Luna 6 HSMs.

Specifies the location of client plugins. This setting is required to use the DPoD plugin to access DPoD HSM on Demand services.

Default:

>Windows: C:\Program Files\SafeNet\LunaClient\plugins

>Linux: /usr/safenet/lunaclient/libs/64/plugins

Specifies which role to check for challenge request status.

Valid Values:

>0 (default): no challenge request

>1: check for Crypto Officer challenge request

>2: check for Crypto User challenge request

NOTE   This functionality requires Luna HSM Client 7.1.0 or newer.

This entry remaps calls to certain older mechanisms, no longer supported on the latest firmware, to use newer, more secure mechanisms instead.

>0: No re-mapping is performed.

>1: The following re-mapping occurs:

•PKCS Key Gen -> 186-3 Prime key gen

•X9.31 Key Gen -> 186-3 Aux Prime key gen (see Mechanism Remap for FIPS Compliance)

NOTE   This remapping is automatic if you are using Luna HSM Client 10.1 or newer, and the configuration file entry is ignored.

This entry remaps calls to newer mechanisms, when they are not available on older firmware, to use older mechanisms instead. Intended for evaluation purposes, such as with existing integrations that require newer mechanisms, before you update to firmware that actually supports the more secure mechanisms. Be careful with this setting, which makes it appear you are using a new, secure mechanism, when really you are using an outdated, insecure mechanism (see Mechanism Remap for FIPS Compliance).

>0: No re-mapping is performed.

>1: The following re-mapping occurs if the HSM firmware permits:

•186-3 Prime key gen -> PKCS Key Gen

•186-3 Aux Prime key gen -> X9.31 Key Gen

NOTE   This remapping is automatic if you are using Luna HSM Client 10.1 or newer, and the configuration file entry is ignored.

The location of the Luna HSM Client tools.

Default:

>Windows: C:\Program Files\SafeNet\LunaClient\

>Linux/AIX: /usr/safenet/lunaclient/bin/

>Solaris: /opt/safenet/lunaclient/bin/

Specifies the location of the token library on 64-bit Windows systems. This value must be correct in order to use a client token. If you are using a hard token, you must manually change this value to point to the hard token library for your operating system. The exact location of the hard token library may vary depending on your installer.

Default: C:\Program Files\SafeNet\LunaClient\softtoken.dll

Specifies the location of the token library on 32-bit Windows systems. This entry appears on Windows only.

By default, ClientTokenLib32 points to the location of the soft token library. If you are using a hard token, you must manually change this value to point to the hard token library for your operating system. The exact location of the hard token library may vary depending on your installer.

Soft Token Default: C:\Program Files\SafeNet\LunaClient\win32\softtoken.dll

Hard Token Default: C:\Windows\SysWOW64\etoken.dll

NOTE   Luna HSM Client 10.1 and newer includes libraries for 64-bit operating systems only.

Determines whether AutoCleanUp closes orphaned sessions in the event that an application leaves sessions open. Useful for SafeNet Luna PCIe HSM hosts. AutoCleanUp runs during C_Finalize on the client. SafeNet Luna Network HSM sessions are tracked and closed by the NTLS service.

Valid Values:

>0 (default): Run AutoCleanUp if your application leaks sessions and you cannot rewrite the application.

>1: Disable AutoCleanUp if you have a SafeNet Luna PCIe HSM and your client application does proper housekeeping, or if your application is connecting via NTLS to a SafeNet Luna Network HSM.

Controls the manner in which the HSM reports the available RAM space.

Valid Values:

>0 (default): the public and private memory total/free values reported in the CK_TOKEN_INFO structure indicate the available flash memory for permanent (TOKEN) objects that are in either the public or private space respectively; this method is PKCS#11 compliant.

>1: the public memory values indicate the total/free RAM memory; this non-standard legacy method was used by some customers to determine space available for session based objects, and must be explicitly selected in order to continue using the legacy method.

NOTE   This functionality requires minimum firmware version 7.1.0.

Controls whether SafeNet Data Protection on Demand's HSM on Demand (HSMoD) services can be active members of an HA group.

Valid Values:

>0: HSMoD services can be added as active HA members.

>1: (default): HSMoD services can be added to HA groups as standby members only. This is the default behavior to maximize HA performance, which may suffer due to network latency.

NOTE   This functionality requires Luna HSM Client 10.1 or newer.

Interval in milliseconds between client connection attempts.

Default: 1000

Maximum connection attempts between the client and an HSMoD service.

Default: 900

Maximum command retries.

Default: 15

Number of threads in the thread pool available for client operations. This entry does not apply to Luna HSM Client 10.2 and newer -- the pool size for these clients is always 64. If the number of parallel connections is more than 64, old connections are closed to make space in the cache.

Default: 32

Time (in seconds) that the client waits for a response from an HSMoD service. This timeout applies to each retry attempt individually.

Default: 120

NOTE   This entry does not appear in the default configuration file, but the default value applies to this timeout. You can manually add the entry if you wish to edit the timeout.

Indicates that XTC (Transferable Token Channel) is enabled. This channel must be enabled for the client to communicate with a DPoD service.

Valid Values:

>0: XTC is disabled.

>1 (default): XTC is enabled.