Partition Capabilities and Policies

An application partition can be configured to provide a range of different functions. The Partition Security Officer can customize this functionality using partition policies. This configuration is governed by the following settings:

>Partition Capabilities are features of partition functionality that are inherited from the parent HSM policies (see HSM Capabilities and Policies). The HSM SO can configure HSM policies to allow or disallow partition capabilities. Some capabilities have corresponding modifiable partition policies.

>Partition Policies are configurable settings that allow the Partition Security Officer to modify the function of their corresponding capabilities.

The table below describes all partition capabilities, their corresponding policies, and the results of changing their settings. This section contains the following procedures:

>Setting Partition Policies Manually

>Setting Partition Policies Using a Template

Destructive Policies

As a security measure, changing some partition policies forces deletion of all cryptographic objects on the partition. These policies are listed as destructive in the table below. Some policy changes are destructive in either direction (OFF-to-ON and ON-to-OFF), while others are destructive only in the direction resulting in lowered partition security.

Use lunacm:> partition showpolicies -verbose to check whether the policy you want to enable/disable is destructive.

#

Partition Capability Partition Policy

0

Enable private key cloning

Always 1. This capability allows private keys to be cloned to another SafeNet HSM partition (required for backup and HA).

NOTE   The HSM SO can disable cloning for all partitions on the HSM by turning off HSM policy 7 (see HSM Capabilities and Policies). In this case, cloning is not possible on the partition, regardless of this capability/policy's setting.

Allow private key cloning (destructive OFF-to-ON)

>1 (default): The partition is capable of cloning private keys to another partition. This policy must be enabled to back up partitions or create HA groups. Public keys and objects can always be cloned, regardless of this policy's setting.

>0: Private keys can never be cloned to another application partition.

Partition policies 0 and 1 may not be set to 1 (ON) at the same time.

1

Enable private key wrapping

Always 1. This capability allows private keys to be encrypted (wrapped) and exported off the partition.

Allow private key wrapping (destructive OFF-to-ON)

>1: Private keys may be wrapped and saved to an encrypted file off the partition. Public keys and objects can always be wrapped and exported, regardless of this policy's setting.

>0 (default): Private keys can never be wrapped and exported off the partition.

Partition policies 0 and 1 may not be set to 1 (ON) at the same time.

2

Enable private key unwrapping

Always 1. This capability allows wrapped private keys to be imported to the partition.

Allow private key unwrapping

>1 (default): Private keys can be unwrapped and stored on the partition.

>0: Private keys cannot be unwrapped onto the partition.

3

Enable private key masking

Always 0. SIM has been deprecated on SafeNet Luna PCIe HSM.

Allow private key masking

Always 0.

4

Enable secret key cloning

Always 1. This capability allows secret keys to be cloned to another SafeNet HSM partition (required for backup and HA).

NOTE   The HSM SO can disable cloning for all partitions on the HSM by turning off HSM policy 7 (see HSM Capabilities and Policies). In this case, cloning is not possible on the partition, regardless of this capability/policy's setting.

Allow secret key cloning (destructive OFF-to-ON)

>1 (default): Secret keys on the partition can be cloned to another partition. This is required for partition backup and HA groups.

>0: Secret keys cannot be backed up, and will not be cloned to other HA group members.

5

Enable secret key wrapping

Always 1. This capability allows secret keys to be encrypted (wrapped) and exported off the partition.

Allow secret key wrapping (destructive OFF-to-ON)

>1 (default): Secret keys can be wrapped and saved to an encrypted file off the partition.

>0: Secret keys can never be wrapped and exported off the partition.

6

Enable secret key unwrapping

Always 1. This capability allows wrapped secret keys to be imported to the partition.

Allow secret key unwrapping

>1 (default): Secret keys can be unwrapped and stored on the partition.

>0: Secret keys cannot be unwrapped onto the partition.

7

Enable secret key masking

Always 0. SIM has been deprecated on SafeNet Luna PCIe HSM.

Allow secret key masking

Always 0.

10

Enable multipurpose keys

Always 1. This capability allows keys that are created or unwrapped on the partition to have more than one of the following attributes enabled (set to 1), and can therefore be used fro multiple types of operation:

Encrypt/Decrypt

Sign/Verify

Wrap/Unwrap

Derive

Allow multipurpose keys (destructive OFF-to-ON)

>1 (default): Keys that are created or unwrapped on the partition may be used for multiple operations.

>0: Keys that are created or unwrapped on the partition may have only one of the affected attributes enabled. Thales Group recommends that you create keys with only the attributes required for their intended purpose. Disabling this policy enforces this rule on the partition.

NOTE   This policy does not affect Diffie-Hellman keys, which are always created with only Derive set to 1.

11

Enable changing key attributes

Always 1. This capability allows the Crypto Officer to modify the following non-sensitive attributes of keys on the partition, changing key functions:

>CKA_ENCRYPT

>CKA_DECRYPT

>CKA_WRAP

>CKA_UNWRAP

>CKA_SIGN

>CKA_SIGN_RECOVER

>CKA_VERIFY

>CKA_VERIFY_RECOVER

>CKA_DERIVE

>CKA_EXTRACTABLE

Allow changing key attributes (destructive OFF-to-ON)

>1 (default): The Crypto Officer can modify the non-sensitive attributes of keys on the partition.

>0: Keys created on the partition cannot be modified.

15

Allow failed challenge responses

Always 1. This capability/policy applies to PED-authenticated SafeNet Luna PCIe HSM only. It determines whether failed login attempts using a challenge secret count towards a partition lockout.

Ignore failed challenge responses (destructive OFF-to-ON)

>1 (default): Failed challenge secret login attempts are not counted towards a partition lockout. Only failed PED key authentication attempts increment the counter.

>0: Failed login attempts using either a PED key or a challenge secret will count towards a partition lockout.

See Activation and Auto-activation on Multi-factor- (PED-) Authenticated Partitions and Logging In to the Application Partition for more information.

16

Enable operation without RSA blinding

Always 1. RSA blinding is a technique that introduces random elements into the signature process to prevent timing attacks on the RSA private key. Some security policies may require this technique, but it does affect performance.

Operate without RSA blinding (destructive OFF-to-ON)

>1 (default): The partition does not use RSA blinding.

>0: The partition uses RSA blinding. Performance will be affected.

17

Enable signing with non-local keys

Always 1. Keys generated on the HSM have the attribute CKA_LOCAL=1. Keys that are imported (unwrapped) to the HSM have CKA_LOCAL=0. These attributes are maintained if keys are backed up or cloned to another HSM partition.

Allow signing with non-local keys

>1 (default): Only keys with attribute CKA_LOCAL=1 can be used to sign data on the partition.

>0: Keys with attribute CKA_LOCAL=0 can be used for signing, and their trust history is not assured.

18

Enable raw RSA operations

Always 1. This capability enables the RSA mechanism CKM_RSA_X_509 on the partition, which allows weak signatures and weak encryption.

Allow raw RSA operations (destructive OFF-to-ON)

>1 (default): The partition allows operations using the RSA mechanism CKM_RSA_X_509.

>0: Operations using CKM_RSA_X_509 are blocked on the partition.

20

Max failed user logins allowed

Displays the maximum number of failed partition login attempts (10) before the partition is locked out (see Logging In to the Application Partition).

Max failed user logins allowed

The Partition SO can lower the effective number of failed logins below the maximum if desired.

Default: 10

21

Enable high availability recovery

Always 1. This capability enables the RecoveryLogin feature on the partition. This feature allows other HA group members to restore the login state of the partiton in the event of a power outage or other such deactivation.

Allow high availability recovery

>1 (default): RecoveryLogin is enabled on the partition. This feature must be configured in advance (see role recoveryinit and role recoverylogin).

>0: RecoveryLogin is disabled on the partition.

22

Enable activation

This capability allows the partition to be activated. See Activation and Auto-activation on Multi-factor- (PED-) Authenticated Partitions.

>1: Always enabled on PED-authenticated HSMs.

>0: Always disabled on password-authenticated HSMs.

Allow activation

>1: The black and/or gray PED key secrets can be encrypted and cached, so that only a keyboard-entered challenge secret is required to log in.

>0 (default): PED keys must be presented at each login, whether via LunaCM or a client application.

This policy is overridden and activation is disabled if a tamper event occurs, or if an uncleared tamper event is detected on reboot. See Tamper Events for more information.

23

Enable auto-activation

This capability allows the partition to remain activated for up to two hours if the SafeNet Luna PCIe HSM loses power. See Activation and Auto-activation on Multi-factor- (PED-) Authenticated Partitions.

>1: Always enabled on PED-authenticated HSMs.

>0: Always disabled on password-authenticated HSMs.

Allow auto-activation

>1: Partition activation (see policy 22 above) is maintained after an HSM power loss of up to two hours.

>0 (default): The partition is deactivated in the event of a power loss. When power is restored, the black and/or gray PED keys must be presented to re-activate the partition.

25

Minimum PIN length

Always 248 (7 characters).

The absolute minimum length for a role password/challenge secret is 7 characters. This is displayed as a value subtracted from 255.

The reason for this inversion is that a policy can only be set to a value equal to or lower than the value set by its capability. If the absolute minimum length was set to 7, the Partition SO would be able to set the preferred minimum to 2, a less-secure policy. The Partition SO may only change the minimum length to increase security by forcing stronger passwords.

Minimum PIN length

The Partition SO can choose to increase the effective minimum length of a role password/challenge secret by setting this policy. The policy value is determined as follows:

Subtract the desired minimum length from 255 (the absolute maximum length), and set policy 25 to that value.

255 - (desired length) = (policy value)

For example, to set the minimum length to 10 characters, set the value of this policy to 245:

255 - 10 = 245

Default: 248 (7 characters)

26

Maximum PIN length

Always 255. The absolute maximum length for a role password/challenge secret is 255 characters.

Maximum PIN length

The effective maximum role password/challenge secret length may be changed by the Partition SO. It must always be greater than or equal to the effective minimum length, determined by the formula described in policy 25 (above).

Default: 255

28

Enable Key Management Functions

Always 1. This capability allows cryptographic objects to be created or deleted on the partition.

Allow Key Management Functions (destructive OFF-to-ON)

>1 (default): The Crypto Officer can manage (create/delete) objects on the partition. The Crypto User is restricted to read-only operations.

>0: Partition objects are read-only for both the CO and CU roles.

29

Enable RSA signing without confirmation

Always 1. This capability governs the HSM's internal signing verification.

Perform RSA signing without confirmation (destructive OFF-to-ON)

>1 (default): No internal signing verification is performed.

>0: The HSM performs an internal verification of signing operations to validate the signature. This has a performance impact on signature operations.

31

Enable private key unmasking

Always 1. Private keys can be unmasked onto the partition.

Allow private key unmasking

>1: Private keys can be unmasked onto the partition (meaning they also can be migrated from legacy SafeNet HSMs that used SIM).

>0 (default): Private keys cannot be unmasked onto the partition (meaning that migration of private keys from legacy HSMs using SIM is also not possible).

32

Enable secret key unmasking

Enable unmasking of a secret key onto the partition.

Allow secret key unmasking

>1: Secret keys can be masked and stored onto the partition.

>0 (default): Secret keys cannot be masked onto the partition.

33

Enable RSA PKCS mechanism

Always 1. The mechanism CKM_RSA_PKCS has known weaknesses, which you can address in your applications. If you are not prepared to address these issues, you can choose to disable the mechanism entirely.

Allow RSA PKCS mechanism (destructive OFF-to-ON)

>1 (default): CKM_RSA_PKCS is enabled on the partition.

>0: CKM_RSA_PKCS is disabled on the partition.

34

Enable CBC-PAD (un)wrap keys of any size

Always 1. There are known vulnerabilities using small keys wrapped/unwrapped with CBC_PAD mechanisms (and with small keys in general). You can choose to enforce a size restriction so that small weak keys cannot be unwrapped onto the partition. The following mechanisms are affected:

>CKM_AES_CBC_PAD

>CKM_AES_CBC_PAD_IPSEC

>CKM_AES_KWP

>CKM_ARIA_CBC_PAD

>CKM_ARIA_L_CBC_PAD

>CKM_CAST3_CBC_PAD

>CKM_CAST5_CBC_PAD

>CKM_DES_CBC_PAD

>CKM_DES3_CBC_PAD

>CKM_DES3_CBC_PAD_IPSEC

>CKM_RC2_CBC_PAD

>CKM_RC5_CBC_PAD

>CKM_SEED_CBC_PAD

>CKM_SM4_CBC_PAD

Allow CBC-PAD (un)wrap keys of any size

>1 (default): All keys can be wrapped or unwrapped using CBC_PAD mechanisms.

>0: Small keys cannot be wrapped or unwrapped using CBC_PAD mechanisms.

37

Enable Secure Trusted Channel

Always 1. This capability allows the partition to use STC for client access.

NOTE   The HSM SO must first enable STC by turning on HSM policy 39.

Force Secure Trusted Channel (destructive ON-to-OFF)

Secure Trusted Channel is a Network HSM feature, and has no function on SafeNet Luna PCIe HSM. Thales Group does not recommend turning this policy on at any time.

39

Enable Start/End Date Attributes

Always 1. This capability allows you to enforce the CKA_START_DATE and CKA_END_DATE attributes of partition objects.

Allow Start/End Date Attributes (destructive ON-to-OFF)

>1: CKA_START_DATE and CKA_END_DATE attributes are enforced for all partition objects.

>0 (default): These attributes can be set for partition objects, but their values are ignored.

A number of partition capabilities are linked to the corresponding HSM capabilities and policies including:

> Partition Policy (0) Enable private key cloning is dependent on HSM Policy (7) Allow cloning;  

>Partition Policy (3) Enable private key masking is dependent on HSM Policy (6) Allow Masking;  

>Partition Policy (4) Enable secret key cloning is dependent on HSM Policy (7) Allow cloning;  

>Partition Policy (7) Enable secret key masking is dependent on HSM Policy (6) Allow Masking;  

>Partition Policy (22) Enable Activation and Partition Policy (23) Enable Auto-Activation are dependent on HSM Policy (1) Allow PED-based authentication;  

>Partition Policy (31) Enable private key unmasking is dependent on HSM Policy (6) Allow Masking; and  

>Partition Policy (32) Enable secret key unmasking is dependent on HSM Policy (6) Allow Masking.  

In addition – the following dependencies within the partition level policies are observed:

>Partition Policy (7) Allow cloning cannot be enabled at the same time as Partition Policy (1) Allow private key wrapping;  

>Partition Policy (1) Allow private key wrapping cannot be enabled at the same time as either one of the policies, Partition Policy (0) Enable private key cloning, Partition Policy (3) Allow private key masking, Partition Policy (31) Enable private key unmasking;  

>Partition Policy (23) Allow Activation is dependent on Partition Policy (22) Allow Activation being enabled;