hsm show

Display a list showing the current configuration of the HSM.

User Privileges

Users with the following privileges can perform this command:

>Admin

>Operator

>Monitor

Syntax

hsm show

Example

lunash:>hsm show


   Appliance Details:
   ==================
   Software Version:                7.4.0-226

   HSM Details:
   ============
   HSM Label:                          myLunaHSM
   Serial #:                           66331
   Firmware:                           7.4.0
   HSM Model:                          Luna K7
   HSM Part Number:                    808-000073-003
   Authentication Method:              Password
   HSM Admin login status:             Not Logged In
   HSM Admin login attempts left:      3 before HSM zeroization!
   RPV Initialized:                    No
   Audit Role Initialized:             No
   Remote Login Initialized:           No
   Manually Zeroized:                  No
   Secure Transport Mode:              No
   HSM Tamper State:                   No tamper(s)

   Partitions created on HSM:
   ==============================
   Partition:         154438865296, Name: mypar0

   Number of partitions allowed:        100
   Number of partitions created:        1

   FIPS 140-2 Operation:
   =====================
   The HSM is NOT in FIPS 140-2 approved operation mode.

   HSM Storage Information:
   ========================
   Maximum HSM Storage Space (Bytes):   33554432
   Space In Use (Bytes):                335544
   Free Space Left (Bytes):             33218888


   Environmental Information on HSM:
   =================================
   Battery Voltage:                     3.072 V
   Battery Warning Threshold Voltage:   2.750 V
   System Temp:                         53 deg. C
   System Temp Warning Threshold:       75 deg. C


   Functionality Module HW:            FM
   =======================

Command Result : 0 (Success)