hsm firmware upgrade

This command updates the HSM firmware by applying the Firmware Update File that was saved in the standby location by the SafeNet factory, or by your most recent SafeNet Luna Network HSM appliance update. The current HSM firmware version (before this command is run), becomes the rollback version after the command is run. See command hsm firmware rollback, to roll back to the previous firmware version.

User Privileges

Users with the following privileges can perform this command:

>Admin

>Operator

Syntax

hsm firmware upgrade [-force]

Argument(s)	Shortcut	Description
-force	-f	Force the action without prompting.

Example

lunash:>hsm firmware upgrade

   The HSM Administrator is logged in. Proceeding...

   WARNING: This operation will upgrade the firmware and restart NTLS/STC !!!

         (1) All current NTLS and/or STC sessions will be reset.
         (2) If the server keys are in hardware, you must re-activate them.
         (3) If the PED use is remote, you must re-connect it.

   Type 'proceed' to continue, or 'quit' to quit now.

   > proceed
   Proceeding...

Update Result : 0 (Success)
resetting HSM ...
Stopping ntls:                                             [  OK  ]

Starting ntls:                                             [  OK  ]
Stopping stcd:                                             [  OK  ]

Starting stcd:                                             [  OK  ]

Command Result : 0 (Success)